해외구매대행 N0.1 쇼핑365
Freud 10" x 60T Thin Kerf Sliding Compound Miter Saw Blade (LU91R010)

상품번호 B0000223IA
상품상태 New    
상품구분 Tools & Home Improvement / Power & Hand Tools
브랜드 Visit the Freud Store
판매자 미확인
판매자위치 미확인
SNS공유
Style

상품가격 가격문의
상품가격 상세보기
이벤트보기





상품특징
Make sure this fits by entering your model number.10" Blade Diameter, 60 Teeth, ATB Grind, 5/8" Arbor, .090" Kerf, -5° Hook AnglePremium TiCo HI-Density Carbide Crosscutting Blend for Maximum PerformanceNegative Hook Angles minimizes climbing for better controlThin Kerf requires less power and allows for faster feed ratePerma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
상품설명
Style:10-Inch 60 Tooth ATB Thin Kerf Miter Saw Blade with 5/8-Inch Arbor and PermaShield Coating Product Description This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.. Amazon.com Ideal for use with sliding compound miter saws and radial arm saws, the 10-inch Freud LU91R010 Thin Kerf Sliding Compound Miter Saw Blade offers easy feeding, reduced waste, and the ability to achieve fine finishes with underpowered saws. It features 60 teeth with alternating top bevels and TiCo high-density carbide tips, negative hook angles for maximum control, and Freud's insulating, Perma-SHIELD coating.LU91R010 Thin Kerf Sliding Compound Miter Saw BladeAt a Glance: Ideal for crosscutting materials 1/2 to 2-3/4 inches thickHeavy-duty plate with laser-cut, anti-vibration slotsTough Perma-SHIELD coating reduces friction and heat buildupTechnical Specs:CoatingPerma-SHIELDDiameter10"Teeth60 ATBArbor5/8"Kerf (K).090Plate (P).071Depth of Cut Negative Hook Angle minimizes climbing for better controlThin Kerf requires less power and allows for faster feed rateNegative Hook Angle for Fine Finishes with Sliding Miter Saws This thin-kerf blade's 60-tooth alternating-top-bevel (ATB) configuration features teeth that face both left and right. The blade's teeth also feature five-degree, negative hook angles, which helps prevent the blade from being too aggressive. This configuration also works to push your work piece down and towards the fence of your saw for smooth, accurate feeding. And because thin-kerf blades remove less material than standard carbide blades, they require less horsepower to produce smooth, accurate results when cutting.This blade is designed for optimal performance when crosscutting wood that is 1/2 to 2-3/4 inches thick, and it also performs well in laminate. This blade can also rip wood or be used with chipboard and plywood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.090 kerf.Well-Balanced, Anti-Vibration Design This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.High-Density Carbide for Maximum Cutting Performance This thin-kerf saw blade's 60 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "crosscut blend." Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard--due to including more high-density tungsten carbide than other TiCo blends--and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.Perma-SHIELD Coating Reduces Friction and Heat Buildup Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.This industrial saw blade is backed by Freud's limited lifetime warranty.About Freud: A History of Innovative Manufacturing An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. What's in the Box Freud LU91R010 Thin Kerf Sliding Miter Saw Blade--10-inch diameter, 5/8-inch arbor, 60-tooth design. From the Manufacturer This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5°negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence.Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.Freud's TicoHi-Density Carbide, Perma- Shield Coating, anti-vibration slots, and tri-metal brazing. See more








2020-12-27 08:02:30


회사소개 | 공지사항 | 개인정보처리방침 | 이용약관 | 찾아오시는길
BANK INFO
입금계좌 : 273001-04-063141
국민은행   예금주: (주)카고맥스
CUSTOMER CENTER
고객센터 : 031-698-2301
상담가능시간 : 월요일 ~ 금요일 10:00 ~ 17:00
점심시간 : 12:00 ~ 13:00 / 토,일,공휴일 휴무
법인명 : (주)카고맥스 | 대표이사 : 허승철
사업자등록번호 : 501-87-00144 | 특별통관대상지정번호 : 20050101
통신판매업신고번호 : 2015-경기성남-1454호 | 팩스 : 031-698-2302
개인정보관리책임자 : 최정원 | 대표이메일 : cargomax2015@gmail.com
주소 : 서울시 금천구 가산동 371-17 비와이씨하이시티 C동 1605 나호 (주)카고맥스
COPYRIGHT © CARGOMAX. ALL RIGHT RESERVED.
쇼핑365는 관세법등 관련규정을 준수하고, 불법물품을 취급하지 아니하며, 분할배송등에 의한 가격 허위신고등 구매자의 불법사항 요청등에 일체 협조하지 않습니다. 또한, 쇼핑365는 해외구매, 해외경매, 배송대행등 상품의 구매 및 입찰, 배송을 대행 중계하는 서비스를 제공하며, 상품 및 상품의 내용, 해외판매처의 상품등록에 대해서는 일체의 책임을 지지 않습니다.