MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Solid micro grain carbide cuts smooth and stays sharp.3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameterPerfect for deep mortises and cutting dadoes in a router table.Remove sawdust and wood chips from plunge cuts with upward shearing.1/4-Inch and 1/2-Inch shanks.
상품설명
From the Manufacturer Three solid micro grain carbide bits for fast, smooth cuts and an edge that stays sharp longer. Spiral bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep mortises, cutting dadoes in a router table and any edge treatment done with the work facing upward. Includes the following diameter UPCUT bits: 1/4-Inch D (1-Inch cutting length, 1/4-Inch shank), 1/2-Inch D (1-1/2-Inch cutting length, 1/2-Inch shank) and 3/8-Inch D (1-1/4-Inch cutting length, 1/2-Inch shank).
Solid micro grain carbide cuts smooth and stays sharp.3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameterPerfect for deep mortises and cutting dadoes in a router table.Remove sawdust and wood chips from plunge cuts with upward shearing.1/4-Inch and 1/2-Inch shanks.
상품설명
From the Manufacturer Three solid micro grain carbide bits for fast, smooth cuts and an edge that stays sharp longer. Spiral bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep mortises, cutting dadoes in a router table and any edge treatment done with the work facing upward. Includes the following diameter UPCUT bits: 1/4-Inch D (1-Inch cutting length, 1/4-Inch shank), 1/2-Inch D (1-1/2-Inch cutting length, 1/2-Inch shank) and 3/8-Inch D (1-1/4-Inch cutting length, 1/2-Inch shank).
2019-03-27 15:42:55