Fibreglass Evercoat 416 Metal Glaze Polyester Finishing and Blending Putty - 30 Oz. Pump
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Superior Adhesion: Bonds with aluminum, galvanized steel, fiberglass, sanded body filler, etc.Two-Part Putty: Polyester finishing and blending putty to be used alone or with METALWORKS productsIncludes Blue Cream Hardener: Forms a nice consistency when mixed with hardenerUnique Formula: Extra thin to spread smoothly; fills grind marks, pinholes and uneven surfacesAbout Evercoat: We lead the industry in the use of “green” technology and manufacture in the USA
상품설명
Metal Glaze polyester finishing and blending putty offers superior adhesion to steel, galvanized metal, aluminum, sanded body filler, fiberglass, most rigid to semi-rigid plastics, catalyzed primers, and sanded OEM topcoats. Blue cream hardener included. For best results, clean, degrease and dry the surface. Use 80–180 grit to remove or scuff the paint and featheredge. Knead the hardener before using. Add the hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4" diameter puddle). Approximate setting time is 4–5 minutes at 72°F (22°C). Apply in layers with firm pressure. Do not apply all at once. Allow 20 minutes to dry, then sand with 180 grit. Final sand with 180 grit and follow it with 220–330 grit, if desired. For best results, apply 2K polyester, 2K urethane, 2K epoxy, or 1K primer. Evercoat leads the industry in the use of “green” technology. Evercoat Products produce a quality collision repair, every time, everywhere.
Make sure this fits by entering your model number.Superior Adhesion: Bonds with aluminum, galvanized steel, fiberglass, sanded body filler, etc.Two-Part Putty: Polyester finishing and blending putty to be used alone or with METALWORKS productsIncludes Blue Cream Hardener: Forms a nice consistency when mixed with hardenerUnique Formula: Extra thin to spread smoothly; fills grind marks, pinholes and uneven surfacesAbout Evercoat: We lead the industry in the use of “green” technology and manufacture in the USA
상품설명
Metal Glaze polyester finishing and blending putty offers superior adhesion to steel, galvanized metal, aluminum, sanded body filler, fiberglass, most rigid to semi-rigid plastics, catalyzed primers, and sanded OEM topcoats. Blue cream hardener included. For best results, clean, degrease and dry the surface. Use 80–180 grit to remove or scuff the paint and featheredge. Knead the hardener before using. Add the hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4" diameter puddle). Approximate setting time is 4–5 minutes at 72°F (22°C). Apply in layers with firm pressure. Do not apply all at once. Allow 20 minutes to dry, then sand with 180 grit. Final sand with 180 grit and follow it with 220–330 grit, if desired. For best results, apply 2K polyester, 2K urethane, 2K epoxy, or 1K primer. Evercoat leads the industry in the use of “green” technology. Evercoat Products produce a quality collision repair, every time, everywhere.
2020-07-30 15:53:23