OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
For Delta 14" Band Saws3 guide blocks 1/2″ x 1/2″ x 7/8″ and 1 guide block 1/2″ x 3/8″ x 1-3/4″Please note the actual dimensions of the Cool Block can be smaller than its nominal dimension by up to 0.05″. For example a 1/2″ Cool Block may measure 0.45″. This is to allow for expansion due to humidity.Item Package Dimension: 5" L x 2.75" W x 1.0" HMade in USA
상품설명
For Delta 14" Band Saws. Contains: 3 guide blocks 1/2" x 1/2" x 3/4" and 1 guide block 1/2" x 3/8" x 1". Cool Blocks Band Saw Blade Guides replace standard metal or plastic guides and enhance cutting performance! They lubricate the band saw blade but do not make it oily. Cool Blocks are made of a non-metallic composite material– Graphite Impregnated Phenolic Laminate with three synthetic dry lubricants. Metal guide blocks create metal to metal contact, causing heat, friction, premature blade wear and breakage. Imitation plastic guides melt and offer no lubrication. Cool Blocks blade guides allow blades to run cooler and last longer with less friction. They improve the cutting performance of any blade width, but are most effective with 1/16″ and 1/8″ wide blades for tight radius work.
For Delta 14" Band Saws3 guide blocks 1/2″ x 1/2″ x 7/8″ and 1 guide block 1/2″ x 3/8″ x 1-3/4″Please note the actual dimensions of the Cool Block can be smaller than its nominal dimension by up to 0.05″. For example a 1/2″ Cool Block may measure 0.45″. This is to allow for expansion due to humidity.Item Package Dimension: 5" L x 2.75" W x 1.0" HMade in USA
상품설명
For Delta 14" Band Saws. Contains: 3 guide blocks 1/2" x 1/2" x 3/4" and 1 guide block 1/2" x 3/8" x 1". Cool Blocks Band Saw Blade Guides replace standard metal or plastic guides and enhance cutting performance! They lubricate the band saw blade but do not make it oily. Cool Blocks are made of a non-metallic composite material– Graphite Impregnated Phenolic Laminate with three synthetic dry lubricants. Metal guide blocks create metal to metal contact, causing heat, friction, premature blade wear and breakage. Imitation plastic guides melt and offer no lubrication. Cool Blocks blade guides allow blades to run cooler and last longer with less friction. They improve the cutting performance of any blade width, but are most effective with 1/16″ and 1/8″ wide blades for tight radius work.
2019-03-21 14:27:04