INCRA IMS2SE Steel Miter Slider SE 25.5-Inch (Special Edition)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Available in 2 sizes: 18" and 25.5"Super strong steel constructionAdjusts for a perfect glide in any standard 3/4" x 3/8" miter channelCompatible with Build-It System panels or create your own custom jig designs
상품설명
Product description Heres a product that combines the versatility of the Incra build-it products with the unique performance and feel of the adjustable GlideLock miter bar used on Incra miter gauges. The steel bars are more rigid than any wooden or plastic runners, and theyre not susceptible to changes in humidity or temperature. Miter slider SE bars are drilled with two separate bolt patterns: (4) #10-24 holes match perfectly with the Incra build-it panels, and theres a second set of (3) 1/4 In. to 20 holes evenly spaced along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing nylon GlideLock adjusting discs provide a precise fit in the miter slot of most table saws, router tables, and band saws, and the discs also give the bars a smooth, low-friction travel. The 18 In. bar has two pairs of discs, and the 25.5 In. bar has three pairs. Both sizes include removable T-slot retaining clips for both ends of the bar for superior stability of larger jigs. From the Manufacturer Here’s a new product that combines the versatility of the INCRA Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA Miter Gauges. The steel bars are more rigid than any wooden or plastic runners, and they’re not susceptible to changes in humidity or temperature. Miter Slider SE bars are drilled with two separate bolt patterns: (4) #10-24 holes match perfectly with the INCRA Build-It Panels, and there’s a second set of (3) 1/4”-20 holes evenly spaced along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing Nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables, and band saws, and the discs also give the bars a smooth, low-friction travel. The 18” bar has two pairs of discs, and the 25.5” bar has three pairs. Both sizes include removable T-slot retaining clips for BOTH ends of the bar for superior stability of larger jigs. Compatibility: The Miter Slider SE is compatible with all INCRA Build-It Panels, and will fit square-sided miter slots approximately 3/4” wide x 3/8” deep, and with or without a 15/16”-wide T-slot at the bottom. The GlideLOCK adjustment will accommodate slots measuring 0.740” to 0.765” in actual width. The Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot. The standard aluminum Miter Slider is the best choice for these applications.
Available in 2 sizes: 18" and 25.5"Super strong steel constructionAdjusts for a perfect glide in any standard 3/4" x 3/8" miter channelCompatible with Build-It System panels or create your own custom jig designs
상품설명
Product description Heres a product that combines the versatility of the Incra build-it products with the unique performance and feel of the adjustable GlideLock miter bar used on Incra miter gauges. The steel bars are more rigid than any wooden or plastic runners, and theyre not susceptible to changes in humidity or temperature. Miter slider SE bars are drilled with two separate bolt patterns: (4) #10-24 holes match perfectly with the Incra build-it panels, and theres a second set of (3) 1/4 In. to 20 holes evenly spaced along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing nylon GlideLock adjusting discs provide a precise fit in the miter slot of most table saws, router tables, and band saws, and the discs also give the bars a smooth, low-friction travel. The 18 In. bar has two pairs of discs, and the 25.5 In. bar has three pairs. Both sizes include removable T-slot retaining clips for both ends of the bar for superior stability of larger jigs. From the Manufacturer Here’s a new product that combines the versatility of the INCRA Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA Miter Gauges. The steel bars are more rigid than any wooden or plastic runners, and they’re not susceptible to changes in humidity or temperature. Miter Slider SE bars are drilled with two separate bolt patterns: (4) #10-24 holes match perfectly with the INCRA Build-It Panels, and there’s a second set of (3) 1/4”-20 holes evenly spaced along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing Nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables, and band saws, and the discs also give the bars a smooth, low-friction travel. The 18” bar has two pairs of discs, and the 25.5” bar has three pairs. Both sizes include removable T-slot retaining clips for BOTH ends of the bar for superior stability of larger jigs. Compatibility: The Miter Slider SE is compatible with all INCRA Build-It Panels, and will fit square-sided miter slots approximately 3/4” wide x 3/8” deep, and with or without a 15/16”-wide T-slot at the bottom. The GlideLOCK adjustment will accommodate slots measuring 0.740” to 0.765” in actual width. The Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot. The standard aluminum Miter Slider is the best choice for these applications.
2019-06-11 14:33:20
