ACCU-RISER MOLDED WOOD LOOK (WALNUT) CHEEK REST
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.WALNUT LOOK TO MATCH STOCKINTERCHANEABLE PADS 5/8"- 1"AMBIDEXTROUS
상품설명
ACCU-RISER MOLDED WOOD LOOK (WALNUT) CHEEK REST MADE IN USA Ambidextrous cheek rest incorporates two interchangeable rubber cheek pads, one 5/8" and 1" which can be switched to better fit your line of sight. A proper cheek weld reduces felt recoil and aligns your optic sight. This will greatly improve comfort and accuracy on your rifle or shotgun. The hard nylon base can be mounted temporarily with supplied 3M double sided tape and held fast with or without a supplied Velcro cinch strap, or unit can be permanently mounted with two screws which are then covered with the pad for a clean secure mount. Fits most rifles and shotguns with classic style stock without cheek pads. Underside of base can be easily widened to fit wider stocks with a file or dremel tool. Please keep in mind the bolt travel and removal of bolt action rifles when mounting a cheek pad. In this model, cheek pad may be removed from base for bolt removal. No need to remove entire unit. MOUNTING INSTRUCTIONS: ~ Position the ACCUR-RISER cheek rest on your weapon. ~ Bolt action, check that the bolt can be cycled and removed for cleaning before mounting to stock. ~ Check fit to stock (underside of base can be trimmed for wider stocks). ~ If mounting temporarily, cut a 1” length of 3M tape and use the velcro cinch strap. ~ If mounting permanent, use the 3” of 3M tape and use the velcro cinch strap. ~ Permanent without strap, drill two 5/16” holes and fasten with two #6 screws provided with kit. ~ 5/8” or 1” cheek pads press onto base easily by pressing down from front to back. ~ Remove pads from base by prying with a dull kitchen knife. ACCU-RISER MOLDED CHEEK REST Comes with: Two interchangeable pads 5/8” & 1” 3” of double sided 3M tape 2- #6 screws to mount permanently Mounting instructions MADE IN USA
Make sure this fits by entering your model number.WALNUT LOOK TO MATCH STOCKINTERCHANEABLE PADS 5/8"- 1"AMBIDEXTROUS
상품설명
ACCU-RISER MOLDED WOOD LOOK (WALNUT) CHEEK REST MADE IN USA Ambidextrous cheek rest incorporates two interchangeable rubber cheek pads, one 5/8" and 1" which can be switched to better fit your line of sight. A proper cheek weld reduces felt recoil and aligns your optic sight. This will greatly improve comfort and accuracy on your rifle or shotgun. The hard nylon base can be mounted temporarily with supplied 3M double sided tape and held fast with or without a supplied Velcro cinch strap, or unit can be permanently mounted with two screws which are then covered with the pad for a clean secure mount. Fits most rifles and shotguns with classic style stock without cheek pads. Underside of base can be easily widened to fit wider stocks with a file or dremel tool. Please keep in mind the bolt travel and removal of bolt action rifles when mounting a cheek pad. In this model, cheek pad may be removed from base for bolt removal. No need to remove entire unit. MOUNTING INSTRUCTIONS: ~ Position the ACCUR-RISER cheek rest on your weapon. ~ Bolt action, check that the bolt can be cycled and removed for cleaning before mounting to stock. ~ Check fit to stock (underside of base can be trimmed for wider stocks). ~ If mounting temporarily, cut a 1” length of 3M tape and use the velcro cinch strap. ~ If mounting permanent, use the 3” of 3M tape and use the velcro cinch strap. ~ Permanent without strap, drill two 5/16” holes and fasten with two #6 screws provided with kit. ~ 5/8” or 1” cheek pads press onto base easily by pressing down from front to back. ~ Remove pads from base by prying with a dull kitchen knife. ACCU-RISER MOLDED CHEEK REST Comes with: Two interchangeable pads 5/8” & 1” 3” of double sided 3M tape 2- #6 screws to mount permanently Mounting instructions MADE IN USA
2019-04-06 11:43:36