Kosmic Kolor Urethane Klear 1 Pint House of Color Uc35
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.May be used to topcoat any Urethane enamel finish, including all Shimrin Base coatsDries fast and may be color sanded and buffed the next dayPreferred clear for first coat before flow coatingPreferred clear for motorcycles due to high acrylic content enabling faster cure time and better resistance to fuel spillsUC-35 is a 3.5 VOC, National Rule and SCAQMD Rule 1151 compliant version of UC-1.
상품설명
House of Kolor UC35 POLYURETHANE ENAMEL KLEAR may be used to topcoat any urethane or polyurethane enamels, and any SHIMRIN Base Coat color. It gives a high-gloss, has excellent weathering and UV resistance. This polyurethane enamel klear dries fast and hard, and can be colored sanded and buffed the next day. UC 35 Clearcoat mixes 2 parts Clear to 1 Part Hardner(KU150) and 1 part RU Reducer (RU310, RU311, RU312) and all can be ordered below. APPLYING Kosmic Klear (UC35) Apply 2-3 medium wet coats with 50% pattern overlap. Gun distance while spraying should be approximately 6 inches. Allow flash time between coats. URETHANE FLASH TEST - PAINT SHOULD BE STICKY AND NOT STRING WHEN TOUCHED AT THE WETTEST POINT BEFORE NEXT COAT IS APPLIED. (When using the flash test, always touch a new spot.) Monitor closely for maximum merging of coats. NOTE: Waiting too long between coats can cause re-coat problems. If excessive dry time has elapsed and clear coat feels dry to the touch, allow 12 hours before sanding and re-coating to avoid lifting problems. NOTE: Over spray from any catalyzed topcoat material (such as our UB04, UB05, UK Kandys, UC35 Klear or UFC19 Komply Klear II may lift when base coats are applied. Mask carefully to prevent this over spray when painting door jambs, etc.
Make sure this fits by entering your model number.May be used to topcoat any Urethane enamel finish, including all Shimrin Base coatsDries fast and may be color sanded and buffed the next dayPreferred clear for first coat before flow coatingPreferred clear for motorcycles due to high acrylic content enabling faster cure time and better resistance to fuel spillsUC-35 is a 3.5 VOC, National Rule and SCAQMD Rule 1151 compliant version of UC-1.
상품설명
House of Kolor UC35 POLYURETHANE ENAMEL KLEAR may be used to topcoat any urethane or polyurethane enamels, and any SHIMRIN Base Coat color. It gives a high-gloss, has excellent weathering and UV resistance. This polyurethane enamel klear dries fast and hard, and can be colored sanded and buffed the next day. UC 35 Clearcoat mixes 2 parts Clear to 1 Part Hardner(KU150) and 1 part RU Reducer (RU310, RU311, RU312) and all can be ordered below. APPLYING Kosmic Klear (UC35) Apply 2-3 medium wet coats with 50% pattern overlap. Gun distance while spraying should be approximately 6 inches. Allow flash time between coats. URETHANE FLASH TEST - PAINT SHOULD BE STICKY AND NOT STRING WHEN TOUCHED AT THE WETTEST POINT BEFORE NEXT COAT IS APPLIED. (When using the flash test, always touch a new spot.) Monitor closely for maximum merging of coats. NOTE: Waiting too long between coats can cause re-coat problems. If excessive dry time has elapsed and clear coat feels dry to the touch, allow 12 hours before sanding and re-coating to avoid lifting problems. NOTE: Over spray from any catalyzed topcoat material (such as our UB04, UB05, UK Kandys, UC35 Klear or UFC19 Komply Klear II may lift when base coats are applied. Mask carefully to prevent this over spray when painting door jambs, etc.
2019-05-22 10:23:45