Genie Superlift Contractor, SLC- 18, 650 lbs Load Capacity, Lift Height 18' 6", Load & Transport with Single User
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품설명
Capacity of 650 lbs (295 kg) for lifting heavy loadsLift weighs 307 lbs (139 kg) for applications with weight limitationsLightweight telescoping aluminum mast for portable durability The Genie SLC-18 Superlift Contractor is a heavy duty material lift for construction and industrial applications with a 18' 6" (5.64 m) maximum lifting height and a 650 lbs (295 kg) capacity.Easy Lifting, Loading, and ManeuveringThe SLC-18 has a standard base with steel forks for lifting loads up and down, non-marking 4" (10 cm) front casters, 5" (13 cm) rear casters with side breaks, and a rear transport wheel assembly. The Superlift has a hold-down bar to secure the aluminum mast during transport, glide rails for easy loading, and can fit through standard doorways.One-Speed Manual WinchPower is provided from a one-speed manual winch, which requires 8.5 cranks per foot (27.8 cranks per meter).About Material LiftsMaterial lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use only.About Genie IndustriesGenie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers. Lightweight telescoping aluminum construction for portability and durability. View larger. View detailed PDF.
Capacity of 650 lbs (295 kg) for lifting heavy loadsLift weighs 307 lbs (139 kg) for applications with weight limitationsLightweight telescoping aluminum mast for portable durability The Genie SLC-18 Superlift Contractor is a heavy duty material lift for construction and industrial applications with a 18' 6" (5.64 m) maximum lifting height and a 650 lbs (295 kg) capacity.Easy Lifting, Loading, and ManeuveringThe SLC-18 has a standard base with steel forks for lifting loads up and down, non-marking 4" (10 cm) front casters, 5" (13 cm) rear casters with side breaks, and a rear transport wheel assembly. The Superlift has a hold-down bar to secure the aluminum mast during transport, glide rails for easy loading, and can fit through standard doorways.One-Speed Manual WinchPower is provided from a one-speed manual winch, which requires 8.5 cranks per foot (27.8 cranks per meter).About Material LiftsMaterial lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use only.About Genie IndustriesGenie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers. Lightweight telescoping aluminum construction for portability and durability. View larger. View detailed PDF.
2020-04-24 23:29:16
