Starrett Precision Ground Flat Stock for the Most Intricate Work - Ideal for Professionals, Amateurs and Home Improvement - O-1 Standard Material Type, 1-3/4" Width, 1/4" Thickness - 54367
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Ideal Tool for Precise and Complex Projects - The stock is dimensionally stable and perfect even for the most intricate work. The stock\'s durability ensures that it can withstand wear and tear, making it a great tool investment.Strong and Tough - It comes with deep hardening characteristics and fine grain structure for excellent service and performance.Use with Ease - It is very convenient and machines freely as it is fully spheroidized and annealed, allowing for excellent and efficient work.Easy to Identify - It has full length identification and eliminates confusion with other steels. By having a clear identification, it ensures that the correct steel is being used for the intended purpose, reducing the risk of errors and hazards.Precision Redefined - Designed to meet the highest standards of accuracy and durability, Starrett\'s dedication for innovation, precision and accuracy has made them as one of the most reliable brands in the field for over a century.
상품설명
Furnished in 18" lengths, ground straight and parallel. The 5 percent chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life Up to 50 percent more pieces per sharpening can be produced than with oil hardening steel. 497 Air Hardening Ground Flat Stock have a wide hardening range of 1700 degree F to 1775 degree F, with 1750 degree F recommended for most work For heavier sections use the high side of the range Heat uniformly throughout but do not soak longer than necessary Cool in still air No pre-heat is required if pack or atmosphere controlled furnace methods are used, but with the open furnace method a pre-heat of 1450 degree F is recommended. A tempering time of two hours at temperature is recommended Use chart for selecting the desired Rockwell C hardness and corresponding tempering temperature For maximum toughness, double temper for two hours at each temperature recommended The following table may also be used as a guide, depending on the type of work. Light Blanking Punches and Dies: 400 degree-425 degree F. Heavy Blanking Punches and Dies: 700 degree F. Annealing: 1525 degree-1575 degree F Furnace cool at no more than 50 degree per hour to 800 degree for maximum softness.
Ideal Tool for Precise and Complex Projects - The stock is dimensionally stable and perfect even for the most intricate work. The stock\'s durability ensures that it can withstand wear and tear, making it a great tool investment.Strong and Tough - It comes with deep hardening characteristics and fine grain structure for excellent service and performance.Use with Ease - It is very convenient and machines freely as it is fully spheroidized and annealed, allowing for excellent and efficient work.Easy to Identify - It has full length identification and eliminates confusion with other steels. By having a clear identification, it ensures that the correct steel is being used for the intended purpose, reducing the risk of errors and hazards.Precision Redefined - Designed to meet the highest standards of accuracy and durability, Starrett\'s dedication for innovation, precision and accuracy has made them as one of the most reliable brands in the field for over a century.
상품설명
Furnished in 18" lengths, ground straight and parallel. The 5 percent chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life Up to 50 percent more pieces per sharpening can be produced than with oil hardening steel. 497 Air Hardening Ground Flat Stock have a wide hardening range of 1700 degree F to 1775 degree F, with 1750 degree F recommended for most work For heavier sections use the high side of the range Heat uniformly throughout but do not soak longer than necessary Cool in still air No pre-heat is required if pack or atmosphere controlled furnace methods are used, but with the open furnace method a pre-heat of 1450 degree F is recommended. A tempering time of two hours at temperature is recommended Use chart for selecting the desired Rockwell C hardness and corresponding tempering temperature For maximum toughness, double temper for two hours at each temperature recommended The following table may also be used as a guide, depending on the type of work. Light Blanking Punches and Dies: 400 degree-425 degree F. Heavy Blanking Punches and Dies: 700 degree F. Annealing: 1525 degree-1575 degree F Furnace cool at no more than 50 degree per hour to 800 degree for maximum softness.
2019-10-12 13:28:04
