Youngstown Glove 11-3285-60-XXL Flame Resistant Waterproof Leather Utility Lined with Kevlar Gloves, 2X-Large
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Goatskin 60% / Kevlar® 20% / Polyurethane 18% / Nylon 2%ImportedA flame-resistant leather work glove that is also waterproof, windproof, cut resistant and puncture resistant.A second layer of leather is sewn over the palm, fingers, thumb, saddle and knuckle to greatly extend the life of the glove and increase protection.Every inch of this glove (top, palm, side of fingers) is lined with DuPont Kevlar fiber for increased cut and puncture resistanceWaterproof, windproof and breathable inner membrane is attached to the middle of the glove to prevent water and wind from reaching your hand.This glove is not intended for use in heavy rains like a rain jacket is. It is intended for work in temperatures ranging from 45 to 0 F and can deal with snow and ice and keep your hands dry.
상품설명
Size:XX-Large Product Description Youngstown Glove's FR Waterproof Leather Utility lined with Kevlar is a winterized, flame resistant work glove that is 100-Percent Waterproof and Windproof, cut resistant, durable and comfortable! The FR flame resistant properties of this glove exceed the industry standards set forth in ASTM D6413 and F2302. This glove is designed to offer super protection, comfort and dexterity for workers winter months. This glove is part of Youngstown's groundbreaking performance leather series where we combine the ergonomic, 3D patterns of a performance gloves with top grain leathers to provide a new level of leather glove protection. The FR Waterproof Leather Utility lined with Kevlar is made of a 3 layer system consisting of a high quality goatskin outer shell, a waterproof and windproof inner membrane and an interior lining made of 100-Percent Kevlar. The Kevlar lining not only enhances the FR properties of the glove but it also adds significant cut resistance. This glove is designed for working in hazardous environments during winter months. This glove does not feature extra insulation but is instead designed to create as much dexterity as technology allows while being FR, Cut Resistant, Waterproof and Leather. This glove rates a Level 4 on the ANSI/ISEA 105-2005 Cut Standard and Level 4 on the Puncture Standard. The outer shell of the glove is made in an ergonomic, form-fit glove pattern that curves to fit the workers hand to maximize dexterity and comfort. A second layer of goatskin is used to reinforce the critical wear areas on the fingertips, thumb, saddle and palm. The waterproof and windproof nature of this glove will enable workers to keep their hands warm and dry during the winter months while still having a superior level of protection. This glove is ideal for utility workers, electricians, natural gas, oil fields and a wide variety of industrial applications where superior hand protection is required. The flame resistant, FR Waterproof Leather Utility lined with Kevlar is available in sizes Small to XX-Large. From the Manufacturer Youngstown Glove's FR Waterproof Leather Utility lined with Kevlar is a winterized, flame resistant work glove that is 100-Percent Waterproof and Windproof, cut resistant, durable and comfortable! The FR flame resistant properties of this glove exceed the industry standards set forth in ASTM D6413 and F2302. This glove is designed to offer super protection, comfort and dexterity for workers during cold, wet winter months. This glove is part of Youngstown's groundbreaking performance leather series where we combine the ergonomic, 3D patterns of a performance gloves with top grain leathers to provide a new level of leather glove protection. The FR Waterproof Leather Utility lined with Kevlar is made of a 3 layer system consisting of a high quality goatskin outer shell, a waterproof and windproof inner membrane and an interior lining made of 100-Percent Kevlar. The Kevlar lining not only enhances the FR properties of the glove but it also adds significant cut resistance. This glove rates a Level 2 on the ANSI/ISEA 105-2005 Cut Standard. The outer shell of the glove is made in an ergonomic, form-fit glove pattern that curves to fit the workers hand to maximize dexterity and comfort. A second layer of goatskin is used to reinforce the critical wear areas on the fingertips, thumb, saddle and palm. The waterproof and windproof nature of this glove will enable workers to keep their hands warm and dry during the winter months while still having a superior level of protection. This glove is ideal for utility workers, electricians, natural gas, oil fields and a wide variety of industrial applications where superior hand protection is required. The flame resistant, FR Waterproof Leather Utility lined with Kevlar is available in sizes Small to XX-Large.
Make sure this fits by entering your model number.Goatskin 60% / Kevlar® 20% / Polyurethane 18% / Nylon 2%ImportedA flame-resistant leather work glove that is also waterproof, windproof, cut resistant and puncture resistant.A second layer of leather is sewn over the palm, fingers, thumb, saddle and knuckle to greatly extend the life of the glove and increase protection.Every inch of this glove (top, palm, side of fingers) is lined with DuPont Kevlar fiber for increased cut and puncture resistanceWaterproof, windproof and breathable inner membrane is attached to the middle of the glove to prevent water and wind from reaching your hand.This glove is not intended for use in heavy rains like a rain jacket is. It is intended for work in temperatures ranging from 45 to 0 F and can deal with snow and ice and keep your hands dry.
상품설명
Size:XX-Large Product Description Youngstown Glove's FR Waterproof Leather Utility lined with Kevlar is a winterized, flame resistant work glove that is 100-Percent Waterproof and Windproof, cut resistant, durable and comfortable! The FR flame resistant properties of this glove exceed the industry standards set forth in ASTM D6413 and F2302. This glove is designed to offer super protection, comfort and dexterity for workers winter months. This glove is part of Youngstown's groundbreaking performance leather series where we combine the ergonomic, 3D patterns of a performance gloves with top grain leathers to provide a new level of leather glove protection. The FR Waterproof Leather Utility lined with Kevlar is made of a 3 layer system consisting of a high quality goatskin outer shell, a waterproof and windproof inner membrane and an interior lining made of 100-Percent Kevlar. The Kevlar lining not only enhances the FR properties of the glove but it also adds significant cut resistance. This glove is designed for working in hazardous environments during winter months. This glove does not feature extra insulation but is instead designed to create as much dexterity as technology allows while being FR, Cut Resistant, Waterproof and Leather. This glove rates a Level 4 on the ANSI/ISEA 105-2005 Cut Standard and Level 4 on the Puncture Standard. The outer shell of the glove is made in an ergonomic, form-fit glove pattern that curves to fit the workers hand to maximize dexterity and comfort. A second layer of goatskin is used to reinforce the critical wear areas on the fingertips, thumb, saddle and palm. The waterproof and windproof nature of this glove will enable workers to keep their hands warm and dry during the winter months while still having a superior level of protection. This glove is ideal for utility workers, electricians, natural gas, oil fields and a wide variety of industrial applications where superior hand protection is required. The flame resistant, FR Waterproof Leather Utility lined with Kevlar is available in sizes Small to XX-Large. From the Manufacturer Youngstown Glove's FR Waterproof Leather Utility lined with Kevlar is a winterized, flame resistant work glove that is 100-Percent Waterproof and Windproof, cut resistant, durable and comfortable! The FR flame resistant properties of this glove exceed the industry standards set forth in ASTM D6413 and F2302. This glove is designed to offer super protection, comfort and dexterity for workers during cold, wet winter months. This glove is part of Youngstown's groundbreaking performance leather series where we combine the ergonomic, 3D patterns of a performance gloves with top grain leathers to provide a new level of leather glove protection. The FR Waterproof Leather Utility lined with Kevlar is made of a 3 layer system consisting of a high quality goatskin outer shell, a waterproof and windproof inner membrane and an interior lining made of 100-Percent Kevlar. The Kevlar lining not only enhances the FR properties of the glove but it also adds significant cut resistance. This glove rates a Level 2 on the ANSI/ISEA 105-2005 Cut Standard. The outer shell of the glove is made in an ergonomic, form-fit glove pattern that curves to fit the workers hand to maximize dexterity and comfort. A second layer of goatskin is used to reinforce the critical wear areas on the fingertips, thumb, saddle and palm. The waterproof and windproof nature of this glove will enable workers to keep their hands warm and dry during the winter months while still having a superior level of protection. This glove is ideal for utility workers, electricians, natural gas, oil fields and a wide variety of industrial applications where superior hand protection is required. The flame resistant, FR Waterproof Leather Utility lined with Kevlar is available in sizes Small to XX-Large.
2021-07-13 20:52:53