FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈           
사진확대

Skywalker Signature Series SKY38323 25dB Amplifier VHF/UHF/FM w/variable gain (SKY38323)
ASIN번호 B008UDF55E
상품상태 New   
상품구분 Electronics / Accessories & Supplies
브랜드 Skywalker
판매자 a1-Components
판매자위치 미확인
현지 판매 가격
$29.99
상품가격 상세보기
관련상품



상품특징
Use this distribution amp to strengthen signal reception from antenna to TVThis product should be installed by a qualified technician to ensure proper performance and suitability.This amplifier will increase or amplify a TV signal, however it cannot create or produce a TV signal.This amplifier is not designed to work with CABLE TV. It's sole purpose is to amplify TV signals ranging from 47 to 1000MHz.If you are not experienced with the distribution of a TV signal you should not purchase this item.
상품설명
The SKY38323 is designed to amplify or boost an off air TV signal. The unit has variable gain via a control on the front panel (up to 25dB of gain VHF frequencies 21db for UHF frequencies). The product has a metal case for durability and connections are made using standard F type connectors for the in/out ports. Contains a built in power supply that is designed to connect to a standard 120 volt/ 60hz AC outlet. An on/off status light is visible on the front panel. Features: Enjoy the control of variable gain (with up to 25dB of gain) in VHF / UHF / FM bands. Low operation interference and minimal noise production & adjustment gain control Bandwidth: 47-1000MHz || Maximum Input: VHF 40dB MV / UHF 20dB MV || Gain: VHF 25dB / UHF 21dB Heavy-duty metal housing with built-in mounting screw holes & power indicator light Please note: When using this product a proper signal path must be established. System With No Pre-Amplifier: The SKY38323 must be installed immediately before any distribution splitter that supplies signals to your TV’s. The proper signal path is: Antenna> coax> amplifier> splitter> TV’s. System With Pre-Amplifier: The SKY38323 must be installed after the power inserter that supplies voltage to your preamp. Failure to do this correctly will block the DC voltage from getting to the preamp and you will have no picture. Also, you risk damaging the SKY38323. The proper signal path is : Antenna> preamp> coax> power inserter> amplifier> splitter> TV’s. It is very important that your antenna is pointed correctly, all fittings are properly installed and that you have used the proper coax cable. RG-6 is the only cable we recommend for this purpose.
























상품특징
Use this distribution amp to strengthen signal reception from antenna to TVThis product should be installed by a qualified technician to ensure proper performance and suitability.This amplifier will increase or amplify a TV signal, however it cannot create or produce a TV signal.This amplifier is not designed to work with CABLE TV. It's sole purpose is to amplify TV signals ranging from 47 to 1000MHz.If you are not experienced with the distribution of a TV signal you should not purchase this item.
상품설명
The SKY38323 is designed to amplify or boost an off air TV signal. The unit has variable gain via a control on the front panel (up to 25dB of gain VHF frequencies 21db for UHF frequencies). The product has a metal case for durability and connections are made using standard F type connectors for the in/out ports. Contains a built in power supply that is designed to connect to a standard 120 volt/ 60hz AC outlet. An on/off status light is visible on the front panel. Features: Enjoy the control of variable gain (with up to 25dB of gain) in VHF / UHF / FM bands. Low operation interference and minimal noise production & adjustment gain control Bandwidth: 47-1000MHz || Maximum Input: VHF 40dB MV / UHF 20dB MV || Gain: VHF 25dB / UHF 21dB Heavy-duty metal housing with built-in mounting screw holes & power indicator light Please note: When using this product a proper signal path must be established. System With No Pre-Amplifier: The SKY38323 must be installed immediately before any distribution splitter that supplies signals to your TV’s. The proper signal path is: Antenna> coax> amplifier> splitter> TV’s. System With Pre-Amplifier: The SKY38323 must be installed after the power inserter that supplies voltage to your preamp. Failure to do this correctly will block the DC voltage from getting to the preamp and you will have no picture. Also, you risk damaging the SKY38323. The proper signal path is : Antenna> preamp> coax> power inserter> amplifier> splitter> TV’s. It is very important that your antenna is pointed correctly, all fittings are properly installed and that you have used the proper coax cable. RG-6 is the only cable we recommend for this purpose.




















2019-04-13 18:32:37