DORMA 80010RH 3/4" Clearance, 3 Right Hand Offset Tapered Type Spindle
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
For Use with All CRL Models, Jackson 900, and Dorma BT575 and BTS80 Series Floor Mounted Door ClosersHanded, Flat Tapered TypeThree Available Door Clearance Heights 5/16", 1/2", and 3/4" (8, 12.7, and 19 mm)
상품설명
Dorma 3º Offset Tapered Type Spindles are available in various heights to accommodate different threshold and finished floor heights, and can be used with all CRL Models, Jackson 900, and Dorma BT575 and BTS80 Floor Mounted Door Closers. The Dorma 3º Offset Flat Tapered Spindles are handed and provide a preload pressure to hold door in the closed position against the stop. They allow the use of all center-hung and offset bottom arms intended for use with this type of spindle, as well as CRL Patch Fitting Inserts. Important Notes: To determine the actual door clearance from finished floor, add 3/16" (5 mm) to the collar height. Example: 1/8" (3 mm) collar height + 3/16" (5 mm) = 5/16" (8 mm) door clearance from finished floor. The Spindle Is Marked With \'L\' For Pull Side - Left Hinged Doors. The Handing Is "RH" Intended For Use With Right Swing Doors.
For Use with All CRL Models, Jackson 900, and Dorma BT575 and BTS80 Series Floor Mounted Door ClosersHanded, Flat Tapered TypeThree Available Door Clearance Heights 5/16", 1/2", and 3/4" (8, 12.7, and 19 mm)
상품설명
Dorma 3º Offset Tapered Type Spindles are available in various heights to accommodate different threshold and finished floor heights, and can be used with all CRL Models, Jackson 900, and Dorma BT575 and BTS80 Floor Mounted Door Closers. The Dorma 3º Offset Flat Tapered Spindles are handed and provide a preload pressure to hold door in the closed position against the stop. They allow the use of all center-hung and offset bottom arms intended for use with this type of spindle, as well as CRL Patch Fitting Inserts. Important Notes: To determine the actual door clearance from finished floor, add 3/16" (5 mm) to the collar height. Example: 1/8" (3 mm) collar height + 3/16" (5 mm) = 5/16" (8 mm) door clearance from finished floor. The Spindle Is Marked With \'L\' For Pull Side - Left Hinged Doors. The Handing Is "RH" Intended For Use With Right Swing Doors.
2019-12-09 16:26:08