해외구매대행 N0.1 쇼핑365
UltraTech 4003 Ultra-Ever Dry Top Coat, 1 Gallon, Translucent White

상품번호 B00AWYBLUW
상품상태 New    
상품구분 Industrial & Scientific / Occupational Health & Safety Products
브랜드 Brand: UltraTech
판매자 미확인
판매자위치 미확인
SNS공유
Size
Style

상품가격 9999999
상품가격 상세보기
이벤트보기





상품특징
Make sure this fits by entering your model number.Top coat of two-part Ultra-Ever Dry coating which helps repel water and oil from coated surfaces, protecting against corrosion caused by moisture and keeping coated surfaces dry, clean, and free of iceForms a thin coating that fills its own interstitial spaces with trapped air molecules to prevent water and oil from wetting the coated surfaceMust be applied over Ultra-Ever Dry Bottom Coat (sold separately) to be effectiveTwo-part coating is non-flammable after application and suitable for indoor and outdoor useTwo-part coating adds a translucent white color and matte finish to coated surfaces
상품설명
Size:1 Gallon  |  Style:Top Coat UltraTech 4003 Ultra-Ever Dry Top Coat, 1 gallon, works with the Ultra-Ever Dry Bottom Coat (sold separately) to form the two-part Ultra-Ever Dry coating which helps repel water and oil from a coated surface, protecting against corrosion caused by moisture and keeping coated surfaces dry, clean, and free of ice. The top coat forms a thin coating that fills its own interstitial spaces with trapped air molecules to prevent water and oil from wetting the coated surface. This product must be applied over Ultra-Ever Dry Bottom Coat (sold separately) and according to the instructions to be effective. The two-part coating adds a translucent white color and matte finish to coated surfaces after curing. The Ultra-Ever Dry Top Coat uses a solvent called acetone to allow the active ingredients to be sprayed on for a thin, uniform coating. The top coat can help protect steel, aluminum, and other metals, as well as plastic, leather, fabric, wood, concrete, and many other materials. The two-part coating is non-flammable after application and suitable for indoor and outdoor use. The two-part coating is classified as a superhydrophobic coating, as it exceeds 150 degrees of contact angle when measuring the sphere of a drop of water on the surface; this means that water, upon contacting the coated surface, forms very round beads which roll off quickly, without leaving the surface moist. It remains superhydrophobic for 30 cycles in a Taber abrasion tester with a CS-10 abrasive wheel. The two-part coating is also oleophobic, which means that it repels refined oil and many other hydrocarbons. During the application and cleanup of Ultra-Ever Dry coatings, the use of a National Institute for Occupational Safety and Health (NIOSH)-approved P100 half-face respirator with an organic vapor cartridge, safety glasses, and protective gloves is recommended. The top coat should be applied over Ultra-Ever Dry bottom coat (sold separately). Shake the top coat can for a minimum of 3‐5 minutes. For best results, apply the top coat at least 1 hour after applying the bottom coat to ensure that coating is dry. Apply the top coat in thin layers, moving left to right across the surface and then top to bottom along the same surface. Avoid over-coating or pooling of the coating. These two passes are the minimum application for successful results. Allow a minimum of 15‐30 minutes dry time to test the coating; allow 2 hours dry time for typical use. In extreme applications or applications where water is not the primary concern (for example, water‐based paints or refined oils), the best results will been seen when the coating is allowed to dry overnight. The two-part coating's durability varies depending on exposure to abrasion, UV rays, and other outdoors conditions; recoating with the top coat will help extend Ultra-Ever Dry's longevity.   Specifications for Ultra-Ever Dry two-part coating (Bottom Coat sold separately) Viscosity (measured with a #3 Zahn cup)8 secondsPercent of solids>10%Surface application temperature50 to 90 degrees FStorage temperature-40 to 115 degrees FShelf life1 year at 77 degrees FCoverage per gallon240 sq. ft./22. sq. mWorking temperature-30 to 300 degrees F UltraTech International manufactures spill containment and environmental compliance products. The company, founded in 1993 and headquartered in Jacksonville, FL, meets International Organization for Standardization (ISO) standard 9002.












2021-02-06 22:23:02


회사소개 | 공지사항 | 개인정보처리방침 | 이용약관 | 찾아오시는길
BANK INFO
입금계좌 : 273001-04-063141
국민은행   예금주: (주)카고맥스
CUSTOMER CENTER
고객센터 : 031-698-2301
상담가능시간 : 월요일 ~ 금요일 10:00 ~ 17:00
점심시간 : 12:00 ~ 13:00 / 토,일,공휴일 휴무
법인명 : (주)카고맥스 | 대표이사 : 허승철
사업자등록번호 : 501-87-00144 | 특별통관대상지정번호 : 20050101
통신판매업신고번호 : 2015-경기성남-1454호 | 팩스 : 031-698-2302
개인정보관리책임자 : 최정원 | 대표이메일 : cargomax2015@gmail.com
주소 : 서울시 금천구 가산동 371-17 비와이씨하이시티 C동 1605 나호 (주)카고맥스
COPYRIGHT © CARGOMAX. ALL RIGHT RESERVED.
쇼핑365는 관세법등 관련규정을 준수하고, 불법물품을 취급하지 아니하며, 분할배송등에 의한 가격 허위신고등 구매자의 불법사항 요청등에 일체 협조하지 않습니다. 또한, 쇼핑365는 해외구매, 해외경매, 배송대행등 상품의 구매 및 입찰, 배송을 대행 중계하는 서비스를 제공하며, 상품 및 상품의 내용, 해외판매처의 상품등록에 대해서는 일체의 책임을 지지 않습니다.