Prime-Line E 2440 Passage Door Latch, 9/32 In. and 1/4 In. Square Drive, Steel, Chrome Finish (Single Pack)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Can be used with any 2-3/8 inch backset handle that has a 9/32 inch or 1/4 inch square driveChrome plated finished faceplateThis door latch is ideal for use on an old style or antique interior square drive spindle locksetChrome plated diecastMounting hardware includedEasy to install in less than 30 minutes with a few simple toolsA Phillips head screwdriver is required for installationPlease refer to the line art drawing for dimensions and compare with your needs before ordering
상품설명
Product Description These passage door latches are constructed of steel and come in a chrome plated finish. This latch is designed for indoor use only, and it functions with the use of a spring-loaded square drive spindle at a maximum width and height of 9/32 inch It is used with antique and vintage door hardware and it features a 2-3/8 inch backset. The latch includes a latch strike and fasteners, but it does NOT include any of the following components and they must be purchased separately: The door knobs, square spindle and rosettes. Note #1: The square drive on this latch has a 9/32 inch opening and a 1/4 inch opening. The maximum square spindle size that this latch will accommodate is 9/32 inch. Note #2: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All® and Bondo Body Filler® have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: Apply a small amount of Loctite ThreadLocker 271® to the set screw threads in the event they are loosening – Loctite® purchased separately. From the Manufacturer This mortise latch bolt is constructed of die cast. It features a chrome-plated face for old style passage doors. This type of mortise latch bolt accepts a square shaft.
Can be used with any 2-3/8 inch backset handle that has a 9/32 inch or 1/4 inch square driveChrome plated finished faceplateThis door latch is ideal for use on an old style or antique interior square drive spindle locksetChrome plated diecastMounting hardware includedEasy to install in less than 30 minutes with a few simple toolsA Phillips head screwdriver is required for installationPlease refer to the line art drawing for dimensions and compare with your needs before ordering
상품설명
Product Description These passage door latches are constructed of steel and come in a chrome plated finish. This latch is designed for indoor use only, and it functions with the use of a spring-loaded square drive spindle at a maximum width and height of 9/32 inch It is used with antique and vintage door hardware and it features a 2-3/8 inch backset. The latch includes a latch strike and fasteners, but it does NOT include any of the following components and they must be purchased separately: The door knobs, square spindle and rosettes. Note #1: The square drive on this latch has a 9/32 inch opening and a 1/4 inch opening. The maximum square spindle size that this latch will accommodate is 9/32 inch. Note #2: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All® and Bondo Body Filler® have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: Apply a small amount of Loctite ThreadLocker 271® to the set screw threads in the event they are loosening – Loctite® purchased separately. From the Manufacturer This mortise latch bolt is constructed of die cast. It features a chrome-plated face for old style passage doors. This type of mortise latch bolt accepts a square shaft.
2019-04-26 03:45:12