Quick Response Turn-Lock Mounting Photocontrol, 1800VA Ballast, 1000W Power, 105-130VAC Voltage, Grey
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Cadmium sulphide photocell for on/off controlTurns on at one to three foot candles of ambient lightInstant On cycle, delay of three to five seconds for Off cycle105-130 VAC input voltage, 1,800 VA ballast, 1,000 W outputPolypropylene housing, UV stabilized
상품설명
This NSi Industries 2005A photocontrol accepts 105-130 VAC input, has a 1,800 VA ballast capability, and can power a 1,000 watt lamp for applications such as street and highway lighting. The cadmium sulphide photocell turns on lighting when the ambient light level drops below one to three foot candles (fc) and works with screw-base compact fluorescent (CFL) and LED bulbs. The photocell turns lighting off when the level exceeds three foot candles. The polypropylene photocell housing is UV stabilized and the clear acrylic window is UV-resistant. This photocontrol unit meets EEI NEMA standards for locking-type photocontrols, is Underwriter Laboratories (UL) Listed for quality assurance, and is suitable for controlling lighting. Specifications Photocell typeCadmium sulphide photo sensor and switch, turn-lock mountInput power supply105-130 VAC, 60 HzOutput1,000 wattsOn/off control1-3 fc ambient light, instant On, 3-5 seconds Off delayEnclosureGray polypropylene, UV stabilizedMount styleTurn-lock mountOperating temperature range-40 to +158 degrees F (-40 to +70 degrees C)Standards metUL Listed, ANSI C136.10, EEI NEMA Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors. NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.
Cadmium sulphide photocell for on/off controlTurns on at one to three foot candles of ambient lightInstant On cycle, delay of three to five seconds for Off cycle105-130 VAC input voltage, 1,800 VA ballast, 1,000 W outputPolypropylene housing, UV stabilized
상품설명
This NSi Industries 2005A photocontrol accepts 105-130 VAC input, has a 1,800 VA ballast capability, and can power a 1,000 watt lamp for applications such as street and highway lighting. The cadmium sulphide photocell turns on lighting when the ambient light level drops below one to three foot candles (fc) and works with screw-base compact fluorescent (CFL) and LED bulbs. The photocell turns lighting off when the level exceeds three foot candles. The polypropylene photocell housing is UV stabilized and the clear acrylic window is UV-resistant. This photocontrol unit meets EEI NEMA standards for locking-type photocontrols, is Underwriter Laboratories (UL) Listed for quality assurance, and is suitable for controlling lighting. Specifications Photocell typeCadmium sulphide photo sensor and switch, turn-lock mountInput power supply105-130 VAC, 60 HzOutput1,000 wattsOn/off control1-3 fc ambient light, instant On, 3-5 seconds Off delayEnclosureGray polypropylene, UV stabilizedMount styleTurn-lock mountOperating temperature range-40 to +158 degrees F (-40 to +70 degrees C)Standards metUL Listed, ANSI C136.10, EEI NEMA Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors. NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.
2019-03-21 06:55:12