SainSmart CNC Micro-Stepping Stepper Motor Driver NEMA23 ST-M5045 2phase 4.5A 24-50V DC 256
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Suitable for 2-phase hybrid stepper motors (Outer diameter: 57,86mm).H bridge bipolar constant phase flow subdivision driver.Speed self-adjustment technology.Easy current subdivision setting.2--64 resolutions,16 operation modes.
상품설명
Overview: The ST-M5045 is a cost-effective, high-performance bipolar two-phase micro-stepping driver, featuring PWM current control technology and superior performance over the M542/2M542/DM542 drivers, for applications requiring low noise and less heat. This helps to achieve low noise, low heat and high performance design requirements. Features: ◆ PWM current control, two-phase sinusoidal current drive output; ◆ Supply voltage up to 50VDC; ◆ Output current peak up to 4.5A; ◆ When the motor is stopped, the current will be halved automatically to reduce the heating value of the motor; ◆ Can drive 4,6,8-wire two-phase, four-phase stepper motor; ◆ High-speed opto coupler isolation signal input, the pulse response frequency up to 300KHZ; ◆ Output current 1.5A ~ 4.5A; ◆ Output current setting is convenient; ◆ Small beautifully dimensioned ◆ Segmentation accuracy 2, 4, 8, 16, 32, 64, 128, 256, 5, 10, 25, 50, 100, 125, 250; ◆ Over-voltage, under-voltage, over-current protection. Specification: ● Technical Parameter: Supply Voltage: 24~50V DC (Typical 36 V). ● Output Current (peak): Min 1.0 A, max 4.5A. ● Logic Input Current: Min 7, typical10, max 16 mA. ● Pulse Frequency: Max 300 KHz. ● Pulse Low Level of Time: 2.5 US. ● Cooling: Natural /mandatory. ● Working Surrounding: Avoid dust, oil mist and corrosive gas. ● Storage Temp: -10---80 deg. ● Working Temp: Max 65 deg. ● Surrounding Humidity: <80%RH without condensing and frost. ● Vibration: 5.9m/s2. ● Model: ST-M5045 Pack List: 1x CNC Stepper Motor Driver ST-M5045 1X Paper Manual
Make sure this fits by entering your model number.Suitable for 2-phase hybrid stepper motors (Outer diameter: 57,86mm).H bridge bipolar constant phase flow subdivision driver.Speed self-adjustment technology.Easy current subdivision setting.2--64 resolutions,16 operation modes.
상품설명
Overview: The ST-M5045 is a cost-effective, high-performance bipolar two-phase micro-stepping driver, featuring PWM current control technology and superior performance over the M542/2M542/DM542 drivers, for applications requiring low noise and less heat. This helps to achieve low noise, low heat and high performance design requirements. Features: ◆ PWM current control, two-phase sinusoidal current drive output; ◆ Supply voltage up to 50VDC; ◆ Output current peak up to 4.5A; ◆ When the motor is stopped, the current will be halved automatically to reduce the heating value of the motor; ◆ Can drive 4,6,8-wire two-phase, four-phase stepper motor; ◆ High-speed opto coupler isolation signal input, the pulse response frequency up to 300KHZ; ◆ Output current 1.5A ~ 4.5A; ◆ Output current setting is convenient; ◆ Small beautifully dimensioned ◆ Segmentation accuracy 2, 4, 8, 16, 32, 64, 128, 256, 5, 10, 25, 50, 100, 125, 250; ◆ Over-voltage, under-voltage, over-current protection. Specification: ● Technical Parameter: Supply Voltage: 24~50V DC (Typical 36 V). ● Output Current (peak): Min 1.0 A, max 4.5A. ● Logic Input Current: Min 7, typical10, max 16 mA. ● Pulse Frequency: Max 300 KHz. ● Pulse Low Level of Time: 2.5 US. ● Cooling: Natural /mandatory. ● Working Surrounding: Avoid dust, oil mist and corrosive gas. ● Storage Temp: -10---80 deg. ● Working Temp: Max 65 deg. ● Surrounding Humidity: <80%RH without condensing and frost. ● Vibration: 5.9m/s2. ● Model: ST-M5045 Pack List: 1x CNC Stepper Motor Driver ST-M5045 1X Paper Manual
2019-03-21 09:04:38
