Anvil ROOF-TEC 7700 Fibered Elastomeric Roof Coating, Protective Acrylic Roof Sealant for Mobile Homes and RV, Energy Saving Solar Reflective White, 1 Gallon
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.DURABLE: 100% Elastomeric sealant is formulated with interlocking fibers that provide superior bridging over seams and small separations. Made in USA.ENERGY SAVING: Brilliant white finish beautifies and reflects up to 90% of the sun’s rays reducing roof temperature and lowering cooling costs.LONG LASTING: Extends the life of your roof with a protective coating that contains an algae and mildew resistant fungicide that lasts in all types of weather.USAGE: Great for mobile home, RV, corrugated metal, concrete, or asphalt roof protection. Do not use on flat roofs. Must have an adequate pitch to allow water to run off.RECOMMENDED APPLICATION: Apply 2 or 3 full coats (for warranty) to a clean surface at the rate of 80 sq ft per gallon depending on type of roof. Easy clean-up with soap and water.
상품설명
Size Name:1 Gallon Anvil ROOF-TEC FIBERED 100% Elastomeric Roof Coating is an acrylic roof coating reinforced with interlocking fibers that provide superior bridging of the coating over seams and small separations. It contains interlocking fibers that increase the coatings durability to with stand weathering.ROOF-TEC FIBERED exceeds performance of similar coatings of this type for adhesion and longevity. Its brilliant white finish not only beautified, but reflects up to 90% of the sun’s rays lowering heat buildup and reducing air conditioning costs. Stays brighter longer for it contains a fungicide to resist mildew growth on the product film.APPLICATION: use roller or airless sprayer. Airless pump set at 1,500 to 2,000 psi delivering 1 to 2 gallons per minute using spray tip of .026-.035. The hose should be at least 3/8? diameter with gun filters removed. Allow 24 hours between coats. Apply only when temperatures are above 50F and when humidity is below 95% for the next 24 rain free hours. If the roof is hot or day is windy, apply a mist-spray with water just before application to avoid sealer from drying too fast. Two or three (for warranty) full coats at the rate of 80 sq. ft. per gallon are needed for proper sealing. Apply each coat perpendicular to the last. Do not thin product. Apply at package consistency.Great for mobile home roof protection. Do not use on flat roofs, roofs must have adequate pitch to allow water to run-off.
Make sure this fits by entering your model number.DURABLE: 100% Elastomeric sealant is formulated with interlocking fibers that provide superior bridging over seams and small separations. Made in USA.ENERGY SAVING: Brilliant white finish beautifies and reflects up to 90% of the sun’s rays reducing roof temperature and lowering cooling costs.LONG LASTING: Extends the life of your roof with a protective coating that contains an algae and mildew resistant fungicide that lasts in all types of weather.USAGE: Great for mobile home, RV, corrugated metal, concrete, or asphalt roof protection. Do not use on flat roofs. Must have an adequate pitch to allow water to run off.RECOMMENDED APPLICATION: Apply 2 or 3 full coats (for warranty) to a clean surface at the rate of 80 sq ft per gallon depending on type of roof. Easy clean-up with soap and water.
상품설명
Size Name:1 Gallon Anvil ROOF-TEC FIBERED 100% Elastomeric Roof Coating is an acrylic roof coating reinforced with interlocking fibers that provide superior bridging of the coating over seams and small separations. It contains interlocking fibers that increase the coatings durability to with stand weathering.ROOF-TEC FIBERED exceeds performance of similar coatings of this type for adhesion and longevity. Its brilliant white finish not only beautified, but reflects up to 90% of the sun’s rays lowering heat buildup and reducing air conditioning costs. Stays brighter longer for it contains a fungicide to resist mildew growth on the product film.APPLICATION: use roller or airless sprayer. Airless pump set at 1,500 to 2,000 psi delivering 1 to 2 gallons per minute using spray tip of .026-.035. The hose should be at least 3/8? diameter with gun filters removed. Allow 24 hours between coats. Apply only when temperatures are above 50F and when humidity is below 95% for the next 24 rain free hours. If the roof is hot or day is windy, apply a mist-spray with water just before application to avoid sealer from drying too fast. Two or three (for warranty) full coats at the rate of 80 sq. ft. per gallon are needed for proper sealing. Apply each coat perpendicular to the last. Do not thin product. Apply at package consistency.Great for mobile home roof protection. Do not use on flat roofs, roofs must have adequate pitch to allow water to run-off.
2019-03-26 14:32:38