Baileigh HPB-45NC Horizontal Press Brake, 3-Phase 220V, 5hp Motor, 45 Ton Pressure
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.220 Volts 3 phaseTouchscreen NC controller45 tons pressurePlus or minus 0.002-inches accuracy36.61-inches table height
상품설명
Baileigh horizontal press brake form is truly a must have in any fabrications shop. This do it all machine can bend, punch, and shear with the correct tooling, yet takes up very little space. The press makes it much easier to make smaller parts such as flanges and brackets, because the material has a surface to lie on during the process. No having to hold one side and hope that it is perfectly level or lined up; the perfectly machined table takes care of that for you. The press runs on 220 volt 3 phase power and produces a whopping 45 tons of pressure with its 5 hp motor. Operation of the press is very simple. It comes standard with an NC controller that can handle up to 99 programs with up to 10 bends per program. The operator can also put the machine in a manual mode for one off projects and set up as well. Bends are actuated by foot pedal control so the operator\'s hands are free to assist with the material. The press has an accuracy of +/- .002-inches. Other features included with the horizontal press brake are a set of single-vee tooling (7.8-inches high) as well as a manual back gauge to help with repeatability. Specifications: return speed: 0.78-inches /seconds.; motor: 5 hp; pressure: 45 tons; punch height: 7.875-inches; working speed: 0.51-inches per seconds; stroke accuracy: +/- 0.002-inches; stroke length: 9.84-inches; table height: 36.61-inches; approach speed: 1.5-inches per seconds; fixture holes: (1) at 3.268-inches diameter/(3) at 2.283-inches diameter and power: 110 volt.
Make sure this fits by entering your model number.220 Volts 3 phaseTouchscreen NC controller45 tons pressurePlus or minus 0.002-inches accuracy36.61-inches table height
상품설명
Baileigh horizontal press brake form is truly a must have in any fabrications shop. This do it all machine can bend, punch, and shear with the correct tooling, yet takes up very little space. The press makes it much easier to make smaller parts such as flanges and brackets, because the material has a surface to lie on during the process. No having to hold one side and hope that it is perfectly level or lined up; the perfectly machined table takes care of that for you. The press runs on 220 volt 3 phase power and produces a whopping 45 tons of pressure with its 5 hp motor. Operation of the press is very simple. It comes standard with an NC controller that can handle up to 99 programs with up to 10 bends per program. The operator can also put the machine in a manual mode for one off projects and set up as well. Bends are actuated by foot pedal control so the operator\'s hands are free to assist with the material. The press has an accuracy of +/- .002-inches. Other features included with the horizontal press brake are a set of single-vee tooling (7.8-inches high) as well as a manual back gauge to help with repeatability. Specifications: return speed: 0.78-inches /seconds.; motor: 5 hp; pressure: 45 tons; punch height: 7.875-inches; working speed: 0.51-inches per seconds; stroke accuracy: +/- 0.002-inches; stroke length: 9.84-inches; table height: 36.61-inches; approach speed: 1.5-inches per seconds; fixture holes: (1) at 3.268-inches diameter/(3) at 2.283-inches diameter and power: 110 volt.
2019-05-21 01:54:52