Magnetic shielding film MCF5 3 Linear Feet
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Length 3 feet ; Width: 1.96 inchAttenuation LF magnetic field: 30 dB (97 %) ; Attenuation HF: 40 dB at 1 GHzWeight: 180 g/m²; Material thickness: 0.02 mm; Color: SilverPermeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 TComposition: Co69, Fe4, Mo4, Nb1, Si16, B7
상품설명
MCF5 is a low cost magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. It also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress. MCF5 can easily be cut with scissors. Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self adhesive version available. To bond this product use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields.
Make sure this fits by entering your model number.Length 3 feet ; Width: 1.96 inchAttenuation LF magnetic field: 30 dB (97 %) ; Attenuation HF: 40 dB at 1 GHzWeight: 180 g/m²; Material thickness: 0.02 mm; Color: SilverPermeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 TComposition: Co69, Fe4, Mo4, Nb1, Si16, B7
상품설명
MCF5 is a low cost magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. It also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress. MCF5 can easily be cut with scissors. Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self adhesive version available. To bond this product use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields.
2019-06-21 15:15:45
