FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈             
사진확대

Direct-Lighting 50010 White MR16 Cylinder Low Voltage Track Lighting Head
ASIN번호 B00IKUG24U
상품상태 New   
상품구분 Tools & Home Improvement / Lighting & Ceiling Fans
브랜드 Direct-Lighting
판매자 Direct-Lighting
판매자위치 미확인
현지 판매 가격
$22.04
상품가격 상세보기
관련상품



상품특징
50W MR16 steel stamping track head with polycarbonate transformer caseMR16 GU5.3 ceramic socket 50W Max. Halogen or LED bulb ( 7W or above), if using LED bulb do not use front glassH System configuration, can be compatible with H type 3-wire-1 circuit track systemIntegral electronic transformer and MR16 lens holders are included. UL Listed.Installation Video: http://youtu.be/QpwIEEQFJwg
상품설명
Max LED bulb length from bulb face to end of bi-pin is 2" Direct-Lighting HT-50010-WH cylinder MR16 50W low voltage track lighting provides an excellent source of illumination when a concentrated and precise beam of light is required. This track head is an ideal accent lighting choice for retail store lighting, gallery lighting, display lighting, task lighting, product highlighting, and residential lighting purpose. The color of this fixture is white, the body is made with steel stamping and the transformer located inside the polycarbonate case. The attached 12-Volt electronic transformer can be used with dimmers that support 120v electronic low voltage transformer. The dimension of this track light fixture is 5” max in height and 4” in width. The swivel arms provide 350-Degree horizontal rotation and 90-Degree vertical projection. This light comes with a MR16 lens holder clip that can be used for spread lens, dichotic filter lens, linear spread lens, or honeycomb louver lens (specialty lens and light bulb are not included). This track head works with any typical H system aka 3-wire-1 circuit track system. Max LED bulb length from bulb face to end of bi-pin is 2" If using LED bulb, please do not use dimmer. Installation guide **Caution : Read all instructions before installation.** Turn off switch at main power source before installation. Match the polarity line on the track to the track fixture. Pull down the adapter sleeve Rotate 90° of the head adapter until the adapter sleeve snaps into the track groove and locks into place. Removal is the reverse procedure. Track fixtures may be positioned anywhere along the track. Trouble shoot Check polarity line. All track components are both mechanically and visually polarized. Proper connections are very importation. Track has a debrossed polarity line which indicates the positive side. Check the metal prongs. No tilt up or down.
































상품특징
50W MR16 steel stamping track head with polycarbonate transformer caseMR16 GU5.3 ceramic socket 50W Max. Halogen or LED bulb ( 7W or above), if using LED bulb do not use front glassH System configuration, can be compatible with H type 3-wire-1 circuit track systemIntegral electronic transformer and MR16 lens holders are included. UL Listed.Installation Video: http://youtu.be/QpwIEEQFJwg
상품설명
Max LED bulb length from bulb face to end of bi-pin is 2" Direct-Lighting HT-50010-WH cylinder MR16 50W low voltage track lighting provides an excellent source of illumination when a concentrated and precise beam of light is required. This track head is an ideal accent lighting choice for retail store lighting, gallery lighting, display lighting, task lighting, product highlighting, and residential lighting purpose. The color of this fixture is white, the body is made with steel stamping and the transformer located inside the polycarbonate case. The attached 12-Volt electronic transformer can be used with dimmers that support 120v electronic low voltage transformer. The dimension of this track light fixture is 5” max in height and 4” in width. The swivel arms provide 350-Degree horizontal rotation and 90-Degree vertical projection. This light comes with a MR16 lens holder clip that can be used for spread lens, dichotic filter lens, linear spread lens, or honeycomb louver lens (specialty lens and light bulb are not included). This track head works with any typical H system aka 3-wire-1 circuit track system. Max LED bulb length from bulb face to end of bi-pin is 2" If using LED bulb, please do not use dimmer. Installation guide **Caution : Read all instructions before installation.** Turn off switch at main power source before installation. Match the polarity line on the track to the track fixture. Pull down the adapter sleeve Rotate 90° of the head adapter until the adapter sleeve snaps into the track groove and locks into place. Removal is the reverse procedure. Track fixtures may be positioned anywhere along the track. Trouble shoot Check polarity line. All track components are both mechanically and visually polarized. Proper connections are very importation. Track has a debrossed polarity line which indicates the positive side. Check the metal prongs. No tilt up or down.




























2019-05-29 16:16:58