LDG Electronics AT-100PROII Automatic Antenna Tuner 1.8-54 MHz, 1-125 Watts, Updated features include an LED indicator for antenna selection and an LED to indicate when in bypass .2 Year Warranty
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.It covers 1.8-54 MHz, and features a two-position antenna switch allowing instant switching between two antennas.For Dipoles, Verticals, Vs, Beams or and Coax Fed AntennaPower requirements: 11 to 16 volts DC at 500 mA Max.125 Watts SSB/CW, 30W DigitalEasy to read LED bar-graph display for RF power, SWR, status. LED indicator for antenna selection and bypass.
상품설명
The AT-100ProII provides fully- and semi-automatic antenna tuning across the entire HF spectrum plus 6 meters, at power levels up to 125 watts. It will tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It will match an amazing range of antennas and impedances, far greater than some tuners you may have considered, including the built-in tuners on many transceivers. The AT-100ProII uses latching relays and other power-saving techniques to consume very little power when not tuning, making it suitable for battery-powered operation. SPECIFICATIONS 1.0 to 125 watt power range (SSB and CW), 100W on 6M. Latching relays for ultra low power operation. 4,000 memories for instantaneous band changing. Built-in 2-port antenna switch, with 2,000 memories each. Tuning time 0.2 to 5 seconds full tune, 0.2 seconds memory tune. 1.8 to 54.0 MHz coverage. Built-in frequency sensor. Tunes 6 to 1,000 ohm loads (16 to 150 on 6m). LED bargraph displays power level, SWR, and status. Antenna Indicator LEDs show the currently selected antenna. User-selectable operating parameters: Auto/Semi, 125/12.5 watt scale, and more. DC power cable included. Power requirements: 11 to 16 VDC @ 500mA max. 7mA when idle. Dimensions: 7.5” x 5.5” x 2.0”. Weight 1.5 pounds. Note: All LDG tuners come with a two year fully transferable warranty.
Make sure this fits by entering your model number.It covers 1.8-54 MHz, and features a two-position antenna switch allowing instant switching between two antennas.For Dipoles, Verticals, Vs, Beams or and Coax Fed AntennaPower requirements: 11 to 16 volts DC at 500 mA Max.125 Watts SSB/CW, 30W DigitalEasy to read LED bar-graph display for RF power, SWR, status. LED indicator for antenna selection and bypass.
상품설명
The AT-100ProII provides fully- and semi-automatic antenna tuning across the entire HF spectrum plus 6 meters, at power levels up to 125 watts. It will tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It will match an amazing range of antennas and impedances, far greater than some tuners you may have considered, including the built-in tuners on many transceivers. The AT-100ProII uses latching relays and other power-saving techniques to consume very little power when not tuning, making it suitable for battery-powered operation. SPECIFICATIONS 1.0 to 125 watt power range (SSB and CW), 100W on 6M. Latching relays for ultra low power operation. 4,000 memories for instantaneous band changing. Built-in 2-port antenna switch, with 2,000 memories each. Tuning time 0.2 to 5 seconds full tune, 0.2 seconds memory tune. 1.8 to 54.0 MHz coverage. Built-in frequency sensor. Tunes 6 to 1,000 ohm loads (16 to 150 on 6m). LED bargraph displays power level, SWR, and status. Antenna Indicator LEDs show the currently selected antenna. User-selectable operating parameters: Auto/Semi, 125/12.5 watt scale, and more. DC power cable included. Power requirements: 11 to 16 VDC @ 500mA max. 7mA when idle. Dimensions: 7.5” x 5.5” x 2.0”. Weight 1.5 pounds. Note: All LDG tuners come with a two year fully transferable warranty.
2020-07-15 17:35:18