HiLetgo 1.8" inch ST7735R SPI 128160 TFT LCD Display Module with PCB for Arduino 51
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Durable hard PCB board and metal, ideal for 1602 interfaceWelded by reflow soldering, no burrs, comfortable and safePower supply IC and SD card slot, convenient to usesTransparent protective film covered on the display protect it from damageSuitable for beginners of LCD color display module,SCM learners and LCD enthusiasts
상품설명
Specification: Driver IC: ST7735R Resolution: 128 x 160 pixels Features: - Can help you to get rid of the Arduino serial monitor. - Some tests and provide UTFT library, AdaFruit Library and instruction on DropBox. - Tested with Latest Arduino 1.6.5. IO interface: 1. RESET --directly to the microcontroller IO 2. CS --directly to the microcontroller IO 3. A0 --IO control registers select 4. SDA --IO control data transmission 5. SCL --IO control SPI bus 6. BL--High Level 3.3V backlight on Package Include: 1 * 1.8" ST7735R SPI TFT LCD Display Module Note: Please contact us for documents and driver if you need. Please noted this LCD is 3.3V, which can not receive 5V signals from the Arduino, so please use a 1k series resistors between GPIO lines on a 5V arduino and this LCD, power this LCD with 5V but drive it with 'level shifted resistor' GPIO lines. Besides, you could use mcifriend 2.8 inch TFT LCD library to get it to work, it will work fine with the Mega or Uno.
Make sure this fits by entering your model number.Durable hard PCB board and metal, ideal for 1602 interfaceWelded by reflow soldering, no burrs, comfortable and safePower supply IC and SD card slot, convenient to usesTransparent protective film covered on the display protect it from damageSuitable for beginners of LCD color display module,SCM learners and LCD enthusiasts
상품설명
Specification: Driver IC: ST7735R Resolution: 128 x 160 pixels Features: - Can help you to get rid of the Arduino serial monitor. - Some tests and provide UTFT library, AdaFruit Library and instruction on DropBox. - Tested with Latest Arduino 1.6.5. IO interface: 1. RESET --directly to the microcontroller IO 2. CS --directly to the microcontroller IO 3. A0 --IO control registers select 4. SDA --IO control data transmission 5. SCL --IO control SPI bus 6. BL--High Level 3.3V backlight on Package Include: 1 * 1.8" ST7735R SPI TFT LCD Display Module Note: Please contact us for documents and driver if you need. Please noted this LCD is 3.3V, which can not receive 5V signals from the Arduino, so please use a 1k series resistors between GPIO lines on a 5V arduino and this LCD, power this LCD with 5V but drive it with 'level shifted resistor' GPIO lines. Besides, you could use mcifriend 2.8 inch TFT LCD library to get it to work, it will work fine with the Mega or Uno.
2019-03-31 07:09:23
