FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈             
사진확대

20 Pcs 4 Pin RGB LED Light Strip Connector JACKYLED PBC 10mm Strip to Strip Solderless Connector for SMD 5050 Multicolor LED Strip
ASIN번호 B00MB6VJYM
상품상태 New   
상품구분 Tools & Home Improvement / Lighting & Ceiling Fans
브랜드 JACKYLED
판매자 미정
판매자위치 미확인
Size
현지 판매 가격
$6.99
상품가격 상세보기
관련상품



상품특징
MAX WATTAGE: 72W max wattage, these connectors can be used for both low and high wattage light strip.FIREPROOF MATERIAL: They are not made from cheap flimsy plastic like others. They are made from PBT material,which is heat resistant, anti-burning and no Fire Hazard.GOOD PERFORMANCE: The led light strip can be locked and connnected very tightly by the connector. 4 Pin LED Light Strip Connector better than the corner connectors because you don't waste space with the wires that connect them, the two strips literally join together right at this connector.EASY TO USE: Open the wire clip. It should snap open with just a little effort.Insert your 10mm LED light strip inside the clip underneath the two contact prongs, making sure the side of the strip aligns with the + symbol.Close Snap the wire clip shut. Gently pull on the wire to confirm you've secured the strip inside the connector. If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit.PACKAGE:20 x 10MM 4 Pin For 5050 SMD RGB led strip Non-Waterproof. MAKE SURE you put the led strip under the pins and not on top. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side. We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly. 30-day money-back guarantee for any 
































상품특징
MAX WATTAGE: 72W max wattage, these connectors can be used for both low and high wattage light strip.FIREPROOF MATERIAL: They are not made from cheap flimsy plastic like others. They are made from PBT material,which is heat resistant, anti-burning and no Fire Hazard.GOOD PERFORMANCE: The led light strip can be locked and connnected very tightly by the connector. 4 Pin LED Light Strip Connector better than the corner connectors because you don't waste space with the wires that connect them, the two strips literally join together right at this connector.EASY TO USE: Open the wire clip. It should snap open with just a little effort.Insert your 10mm LED light strip inside the clip underneath the two contact prongs, making sure the side of the strip aligns with the + symbol.Close Snap the wire clip shut. Gently pull on the wire to confirm you've secured the strip inside the connector. If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit.PACKAGE:20 x 10MM 4 Pin For 5050 SMD RGB led strip Non-Waterproof. MAKE SURE you put the led strip under the pins and not on top. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side. We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly. 30-day money-back guarantee for any 




























2019-05-29 16:25:36