Germes Lab. AV Video Audio Cable Toyota Touch 2 Go Plus Entune Audio Plus Premium Audio Monitors
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Save by connecting additional video sources (HD players, TV receivers, etc.) without a video interfaceCompatible with Toyota, equipped with Touch 2 and Entune monitorsNo risk of voiding car warranty as the cable offers simple Plug&Play connection without the need to cut car wiringUnlock video in motion functionContinue using all of the OEM functions as you did before connecting the cable
상품설명
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune OEM monitors without using a video interface. After connection an "AV input" icon is automatically activated in the monitor and video in motion is unlocked. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal. Thus you will be able to connect video devices, (DVD player, Android box or TV receiver) to the OEM monitor without using a video interface. All OEM functions of the monitor will work the same way as before. In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using the OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation. Compatibility The monitor should have 28-pin socket for cable connection Toyota Touch 2, Touch 2 with Go, Touch 2 with Go Plus Alphard 2015–2017, Auris, Avensis 2014–, C-HR 2016–, Camry 2014–2017, Corolla, Corolla Sedan 2013–, GT86 2016–, Highlander, Hilux 2013–, Mirai 2016–, Land Cruiser 150 2013–, Prius+, RAV4, Verso 2014–, Verso S 2013–, Yaris 2014– Entune Audio, Entune Audio Plus, Entune Premium Audio (incompatible with Entune 3.0) Alphard 2015–, Avalon 2014–, C-HR 2016–, Camry 2014–, Corolla 2013–, Fortuner 2015–, GT86 2016–, Highlander 2013–, Mirai 2016–, Prius c, Prius v, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza 2014– To adjust the video system of the input video signal or switch the picture mode (4:3, 16:9), refer to the user manual of your monitor. After cable connection the OEM microphone of OEM BT-HandsFree will work the same way as before (if it has been installed). if there is no OEM microphone in your car you will need an AV cable with microphone. Please, contact our manager to purchase that cable.
Save by connecting additional video sources (HD players, TV receivers, etc.) without a video interfaceCompatible with Toyota, equipped with Touch 2 and Entune monitorsNo risk of voiding car warranty as the cable offers simple Plug&Play connection without the need to cut car wiringUnlock video in motion functionContinue using all of the OEM functions as you did before connecting the cable
상품설명
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune OEM monitors without using a video interface. After connection an "AV input" icon is automatically activated in the monitor and video in motion is unlocked. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal. Thus you will be able to connect video devices, (DVD player, Android box or TV receiver) to the OEM monitor without using a video interface. All OEM functions of the monitor will work the same way as before. In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using the OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation. Compatibility The monitor should have 28-pin socket for cable connection Toyota Touch 2, Touch 2 with Go, Touch 2 with Go Plus Alphard 2015–2017, Auris, Avensis 2014–, C-HR 2016–, Camry 2014–2017, Corolla, Corolla Sedan 2013–, GT86 2016–, Highlander, Hilux 2013–, Mirai 2016–, Land Cruiser 150 2013–, Prius+, RAV4, Verso 2014–, Verso S 2013–, Yaris 2014– Entune Audio, Entune Audio Plus, Entune Premium Audio (incompatible with Entune 3.0) Alphard 2015–, Avalon 2014–, C-HR 2016–, Camry 2014–, Corolla 2013–, Fortuner 2015–, GT86 2016–, Highlander 2013–, Mirai 2016–, Prius c, Prius v, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza 2014– To adjust the video system of the input video signal or switch the picture mode (4:3, 16:9), refer to the user manual of your monitor. After cable connection the OEM microphone of OEM BT-HandsFree will work the same way as before (if it has been installed). if there is no OEM microphone in your car you will need an AV cable with microphone. Please, contact our manager to purchase that cable.
2019-04-01 23:46:38