Kicker L7 2.38" Coil Replacement Kit - Dual 2 Ohm
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Aftermarket Kicker L7 Coil Replacement kit. Hundreds sold, excellent results!Kit shown in photo is specific to this speaker.Includes all the adhesives, shims, and wires needed.Step-by-step instructions available online.FREE phone support and FREE shipping within the U.S.
상품설명
Kicker L7 12" or 15" Solobaric Subwoofer Recoil Kit. 2.38" Voice coil version. (2" and 2.58" versions also available). Kit shown in photo is an example, and may not be specific to this speaker. COILS ARE MEASURED BY INNER DIAMETER!! THIS IS A CUSTOM KIT. To most car audio guys, it's common knowledge that Kicker does not sell replacement parts or kits for their L7 Solobaric line of subwoofers. This is a custom kit that includes all the needed parts and adhesives to do your own custom coil replacement on your Kicker L7 Solobaric Subwoofer. **NOTES** #1 - You MUST reuse your original terminal plate, cone, and surround. #2 - Kit includes all the adhesives, shims, and wires needed. #3 - This is NOT a drop-in kit - this is a professional kit. #4 - Instructions are not included. Please check the DIY instructions page for updates. THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT. Kit includes: 1 - Heavy-duty 2.38" dual 2 Ohm voice coil custom-wound on black aluminum former (upgrade from original); 2 - Heavy-duty spiders (correctly-sized); 1 - 3.25" inverted dust cap (gray with no logo); 1 - Bottle of professional-grade CA Adhesive (for voice coil); 1 - Spray bottle of CA Adhesive Activator; 1 - Bottle of professional-grade black rubber speaker adhesive; 8 - Large speaker shims; 2 - Tin application brushes; 2 Ft of lead wire rated up to 1600W peak; 2 Lengths of shrink tube for coating your new leads. THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT.
Aftermarket Kicker L7 Coil Replacement kit. Hundreds sold, excellent results!Kit shown in photo is specific to this speaker.Includes all the adhesives, shims, and wires needed.Step-by-step instructions available online.FREE phone support and FREE shipping within the U.S.
상품설명
Kicker L7 12" or 15" Solobaric Subwoofer Recoil Kit. 2.38" Voice coil version. (2" and 2.58" versions also available). Kit shown in photo is an example, and may not be specific to this speaker. COILS ARE MEASURED BY INNER DIAMETER!! THIS IS A CUSTOM KIT. To most car audio guys, it's common knowledge that Kicker does not sell replacement parts or kits for their L7 Solobaric line of subwoofers. This is a custom kit that includes all the needed parts and adhesives to do your own custom coil replacement on your Kicker L7 Solobaric Subwoofer. **NOTES** #1 - You MUST reuse your original terminal plate, cone, and surround. #2 - Kit includes all the adhesives, shims, and wires needed. #3 - This is NOT a drop-in kit - this is a professional kit. #4 - Instructions are not included. Please check the DIY instructions page for updates. THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT. Kit includes: 1 - Heavy-duty 2.38" dual 2 Ohm voice coil custom-wound on black aluminum former (upgrade from original); 2 - Heavy-duty spiders (correctly-sized); 1 - 3.25" inverted dust cap (gray with no logo); 1 - Bottle of professional-grade CA Adhesive (for voice coil); 1 - Spray bottle of CA Adhesive Activator; 1 - Bottle of professional-grade black rubber speaker adhesive; 8 - Large speaker shims; 2 - Tin application brushes; 2 Ft of lead wire rated up to 1600W peak; 2 Lengths of shrink tube for coating your new leads. THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT.
2020-06-06 19:44:20
