iCreatin 8 Multi Port PoE+ Injector Midspan for 8 Devices, Add Power Over Ethernet to Any Switch. Use with External Power Supply for Passive or 802.3af/at Devices.
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Attention: This link do not included external power supply! For external power supply, please check our other link.This Power over Ethernet module allows you to power up to 8 devices remotely over ethernet wiring up to 328 ft (100 meters) away; Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable.Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground.10/100M operation, Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable.Power Supply not included - for 802.3af devices use a 48v supply, Mikrotik uses 24v, Ubiquiti needs 24v or 48v, OpenMesh needs 24v or 48v
상품설명
Color:8PoE w/o Power supply Note: this device only used for 10/100Mbps Device, operate with 12 volt to 48 volt external power supply; The external power supply is not included in this link; if you need 8 ports POE injector with power supply, please check the follow link: http://www.amazon.com/dp/B00XXEZT2O 12 volt to 48 volt operation with external power supply - see our other listings for power supplies Features: 8 port Power Injector module 8 LAN ports, 8 LAN+Power ports, shielded 650 ma resettable fuse on each port Power VOIP phones, IP Cameras, WiFi Access Points, and more Same voltage to all ports, share available power equally Display indicator: LED power light Compatiable with all ethernet switch or router Compatiable with all power supply no more than 48 volts Power for all 802.3af devices (use a 48v power supply) Two Input connectors for choice: 1. DC Barrel plug size : 2.1mm x 5.5mm 2. DC Terminal block (can be removed), if you use this connector, please make sure the positive and negative connect correct, otherwise it will be broken! Used to provide PoE power for: - IP phones like Polycom, Cisco, Yealink - WiFi Access points - IP Cameras - 802.3af devices - Ubiquiti devices & Mikrotik & any POE device These devices provide power on the spare data wires in the ethernet cable. all devices receive the same voltage What in box? 1x 8-ports POE power over ethernet injector (External power supply is not included in this link)
Make sure this fits by entering your model number.Attention: This link do not included external power supply! For external power supply, please check our other link.This Power over Ethernet module allows you to power up to 8 devices remotely over ethernet wiring up to 328 ft (100 meters) away; Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable.Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground.10/100M operation, Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable.Power Supply not included - for 802.3af devices use a 48v supply, Mikrotik uses 24v, Ubiquiti needs 24v or 48v, OpenMesh needs 24v or 48v
상품설명
Color:8PoE w/o Power supply Note: this device only used for 10/100Mbps Device, operate with 12 volt to 48 volt external power supply; The external power supply is not included in this link; if you need 8 ports POE injector with power supply, please check the follow link: http://www.amazon.com/dp/B00XXEZT2O 12 volt to 48 volt operation with external power supply - see our other listings for power supplies Features: 8 port Power Injector module 8 LAN ports, 8 LAN+Power ports, shielded 650 ma resettable fuse on each port Power VOIP phones, IP Cameras, WiFi Access Points, and more Same voltage to all ports, share available power equally Display indicator: LED power light Compatiable with all ethernet switch or router Compatiable with all power supply no more than 48 volts Power for all 802.3af devices (use a 48v power supply) Two Input connectors for choice: 1. DC Barrel plug size : 2.1mm x 5.5mm 2. DC Terminal block (can be removed), if you use this connector, please make sure the positive and negative connect correct, otherwise it will be broken! Used to provide PoE power for: - IP phones like Polycom, Cisco, Yealink - WiFi Access points - IP Cameras - 802.3af devices - Ubiquiti devices & Mikrotik & any POE device These devices provide power on the spare data wires in the ethernet cable. all devices receive the same voltage What in box? 1x 8-ports POE power over ethernet injector (External power supply is not included in this link)
2020-01-10 14:23:01
