TEMCo 1/4 Inch 3"x12" 6061 Aluminum Tooling Flat Sheet Plate Bar Mill Stock
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Processing: Excellent Machinability, Weldability, and High Strength. Welding: 6061 can be readily welded using all the common welding techniques.Forging: 6061 can be forged at temperatures in the range of 750°F to 900°F. Hot working may be done in the temperature range of 500°F to 700°F.Heat Treating: Solution heat treat at 990°F for adequate time to allow for thorough heating and then water quenched. Precipitation hardening is done at 320°F for 18 hours and air cool, followed by 350°F for 8 hours and air cooled.Annealing: Should be done at 775°F for at 2 to 3 hours at temperature, followed by controlled cooling at 50°F per hour down to 500°F, then air cooled.Aging: The aging precipitation heat treatment is done at 350°F for 8 hours, followed by air cooling. This produces the T6 temper.
상품설명
6061 Aluminum Tooling Plate (Alloy: 6061 T651) / Thickness: 1/4" (0.25") / Dimensions: 3" x 12" / Dimensional Tolerance: Thickness: +0.023" / -0.000", Cut Size: +0.120" / -0.000" / Tensile Strength: 45 kSI / Yield Strength: 40-42 kSI / Shear Strength: 31 kSI / Brinell Hardness: 95 / Alloy Composition (% of weight): Al 95.8-98.6, Cr 0.04-0.35, Fe 0.7 Max, Mg 0.8-1.2, Mn 0.15 Max, Si 0.4-0.8, Ti 0.15 Max, Zn 0.25 Max. Other elements no more than 0.05% each, 0.15% total.
Make sure this fits by entering your model number.Processing: Excellent Machinability, Weldability, and High Strength. Welding: 6061 can be readily welded using all the common welding techniques.Forging: 6061 can be forged at temperatures in the range of 750°F to 900°F. Hot working may be done in the temperature range of 500°F to 700°F.Heat Treating: Solution heat treat at 990°F for adequate time to allow for thorough heating and then water quenched. Precipitation hardening is done at 320°F for 18 hours and air cool, followed by 350°F for 8 hours and air cooled.Annealing: Should be done at 775°F for at 2 to 3 hours at temperature, followed by controlled cooling at 50°F per hour down to 500°F, then air cooled.Aging: The aging precipitation heat treatment is done at 350°F for 8 hours, followed by air cooling. This produces the T6 temper.
상품설명
6061 Aluminum Tooling Plate (Alloy: 6061 T651) / Thickness: 1/4" (0.25") / Dimensions: 3" x 12" / Dimensional Tolerance: Thickness: +0.023" / -0.000", Cut Size: +0.120" / -0.000" / Tensile Strength: 45 kSI / Yield Strength: 40-42 kSI / Shear Strength: 31 kSI / Brinell Hardness: 95 / Alloy Composition (% of weight): Al 95.8-98.6, Cr 0.04-0.35, Fe 0.7 Max, Mg 0.8-1.2, Mn 0.15 Max, Si 0.4-0.8, Ti 0.15 Max, Zn 0.25 Max. Other elements no more than 0.05% each, 0.15% total.
2019-12-05 16:08:16