Bob Smith Industries BSI-109 Insta-Cure Gap Filling, 8 oz.
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Country Of Origin: United StatesPackage Width: 5.08 CentimetersPackage Height: 16.51 CentimetersPackage Length: 5.08 Centimeters
상품설명
Size:8 Ounce Insta-cure+ is a higher viscosity ca for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker ca is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, insta-cure+ should also be used. To prevent premature curing, do not spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread out.
Make sure this fits by entering your model number.Country Of Origin: United StatesPackage Width: 5.08 CentimetersPackage Height: 16.51 CentimetersPackage Length: 5.08 Centimeters
상품설명
Size:8 Ounce Insta-cure+ is a higher viscosity ca for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker ca is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, insta-cure+ should also be used. To prevent premature curing, do not spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread out.
2020-09-24 22:24:46