Dustless Technologies -DustBuddie Universal Dust Shroud for 7-1/4 Inch Worm Drive, Circular Saw Dust Collection, Circular Saw Dust Collector, D4000
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Complies with OSHA 2017 silica rule lawsUniversal fit for 7-1/4" worm drive and hypoid circular sawsUniversal fit for 7-1/4" worm drive and hypoid circular sawsUniversal fit for 7-1/4" worm drive and hypoid circular saws (Universal fit for 7-1/4" worm drive and hypoid circular saws (does NOT fit compact saws or right side circular saws)
상품설명
The Dust Buddie is your solution to the dust cloud created when cutting concrete with a worm drive or hypoid circular saw. It is universal for 7-1/4" worm drive and hypoid circular saws. Using vacuum suction, it captures up to 99% of the dust created when cutting concrete and stone products. Six non-marking wheels allow the shroud and tool to glide with ease to keep cuts straighter and prevent damage to your work surface. There are no tools required for installation. The simple hook-and-loop attachment method allows you to get to work faster without hassle. This shroud is made of a durable blend of polycarbonate & ABS attached to a stainless steel base plate. Two rubber dust shields collect dust from both the front and (optionally) back of the blade. The Dust Buddie complies with OSHA silica laws and EPA regulations for point-of-origin dust collection. For full performance, use this shroud with a vacuum rated at 120 CFM or greater such as the Dustless HEPA Wet Dry Vacuum. This product connects to 1.25" and 1.5" hose cuffs using the included adapter. Includes (1) Dust Buddie, (1) primary front rubber dust shield, (1) optional rear rubber dust shield, (1) 1.5" x 1.5" swivel cuff adapter, (1) front spacer, and (1) releasable tie for keeping the hose out of the way.
Complies with OSHA 2017 silica rule lawsUniversal fit for 7-1/4" worm drive and hypoid circular sawsUniversal fit for 7-1/4" worm drive and hypoid circular sawsUniversal fit for 7-1/4" worm drive and hypoid circular saws (Universal fit for 7-1/4" worm drive and hypoid circular saws (does NOT fit compact saws or right side circular saws)
상품설명
The Dust Buddie is your solution to the dust cloud created when cutting concrete with a worm drive or hypoid circular saw. It is universal for 7-1/4" worm drive and hypoid circular saws. Using vacuum suction, it captures up to 99% of the dust created when cutting concrete and stone products. Six non-marking wheels allow the shroud and tool to glide with ease to keep cuts straighter and prevent damage to your work surface. There are no tools required for installation. The simple hook-and-loop attachment method allows you to get to work faster without hassle. This shroud is made of a durable blend of polycarbonate & ABS attached to a stainless steel base plate. Two rubber dust shields collect dust from both the front and (optionally) back of the blade. The Dust Buddie complies with OSHA silica laws and EPA regulations for point-of-origin dust collection. For full performance, use this shroud with a vacuum rated at 120 CFM or greater such as the Dustless HEPA Wet Dry Vacuum. This product connects to 1.25" and 1.5" hose cuffs using the included adapter. Includes (1) Dust Buddie, (1) primary front rubber dust shield, (1) optional rear rubber dust shield, (1) 1.5" x 1.5" swivel cuff adapter, (1) front spacer, and (1) releasable tie for keeping the hose out of the way.
2019-04-05 04:13:44