TOPCHANCES 4 Axis USB TB6560 2 phase Stepper Motor Driver Board+Remote Controller Nema23
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.This USB6560T4 is a new 4 axis TB6560 CNC control board with USB input, suitable for controlling max.3A 2 phase stepper motor.USB CNC 4 Axis TB6560 3.0A 15KHZ Stepper Motor USB Driver Board TB6560 ControllerIt's easy to operate for CNC DIY, but as it's controlled by USB port, users need more careful with the software install.
상품설명
Features: 1.4 axis in one unit, easy handling with PC, power supply & motors. 2. 4 decay modes, suitable for 2 phase stepper motor with no more than 3A current. 3.The software designed for this board, can support maximum 8pcs limit switches (Every axis with 2 pcs), much better than Mach3. 4.When connected with manual control box, the board can work off-line, good for coordinate adjusting on tool setting part. 5.4 current setting: 0.75A, 1.5A, 2.25A, 3.0A. 6. Automatically reducing current on board, when stepper motors were forced to stop, the current on board will be 25% of full current to protect the motor and IC chips. 7. 12V isolated power supply output easy for external application, like cooling fan. 8. Limit port is optical isolated to protect IC, also it's with 12VDC input, easy for connecting with proximity switch. NOTE: This driver board is controlled by USB port, can only use with the CNC software special designed for this board. It can't be used with MACH3, KCAM4 or other CNC softwares. Users should follow its manual and install the software correctly. Include: 1 x 4 Axis CNC Driver Board 1 x RS232 Remote Controller 1 x USB Cable 1 x CD
Make sure this fits by entering your model number.This USB6560T4 is a new 4 axis TB6560 CNC control board with USB input, suitable for controlling max.3A 2 phase stepper motor.USB CNC 4 Axis TB6560 3.0A 15KHZ Stepper Motor USB Driver Board TB6560 ControllerIt's easy to operate for CNC DIY, but as it's controlled by USB port, users need more careful with the software install.
상품설명
Features: 1.4 axis in one unit, easy handling with PC, power supply & motors. 2. 4 decay modes, suitable for 2 phase stepper motor with no more than 3A current. 3.The software designed for this board, can support maximum 8pcs limit switches (Every axis with 2 pcs), much better than Mach3. 4.When connected with manual control box, the board can work off-line, good for coordinate adjusting on tool setting part. 5.4 current setting: 0.75A, 1.5A, 2.25A, 3.0A. 6. Automatically reducing current on board, when stepper motors were forced to stop, the current on board will be 25% of full current to protect the motor and IC chips. 7. 12V isolated power supply output easy for external application, like cooling fan. 8. Limit port is optical isolated to protect IC, also it's with 12VDC input, easy for connecting with proximity switch. NOTE: This driver board is controlled by USB port, can only use with the CNC software special designed for this board. It can't be used with MACH3, KCAM4 or other CNC softwares. Users should follow its manual and install the software correctly. Include: 1 x 4 Axis CNC Driver Board 1 x RS232 Remote Controller 1 x USB Cable 1 x CD
2019-03-22 23:46:51