ETS Black Stainless Steel Air Intake System w/ 5" Velocity Stack Compatible with 2008-15 Mitsubishi Evolution X 10
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
5" KN Filter. ETS Milled MAF Adapter.Perfrect Transition From Adapter To MAF.Blow Off Valve Recirculation TubeIncludes heat shield to prevent idle surge. BOV Vacuum Line.All Couplers, Clamps and Hardware.
상품설명
The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube. With a built in dowel pin and precise inner diameter to make a 100% seal with the rubber grommet, this piece installs and fits as if it had a Mitsubishi part number. The system is then braced to the chassis with an aluminum bracket to ensure no movement or vibration. A single-piece mandrel bent 3" intake pipe makes the connection between the MAF and turbo with a smooth transition recirculation fitting for an easy connection to the BOV discharge. The ETS Mitsubishi Evolution X Intake includes a 5.0" velocity stack making it the largest intake on the market. This intake has been proven to gain over 56whp when used with a manual boost controller at 22psi. Features:5" KN FilterETS Milled MAF AdapterPerfrect Transition From Adapter To MAFBlow Off Valve Recirculation TubeIncludes heat shield to prevent idle surge.BOV Vacuum LineAll Couplers, Clamps and Hardware.+56whp when used with a boost controller @ 22psiWeight: 3lbs
5" KN Filter. ETS Milled MAF Adapter.Perfrect Transition From Adapter To MAF.Blow Off Valve Recirculation TubeIncludes heat shield to prevent idle surge. BOV Vacuum Line.All Couplers, Clamps and Hardware.
상품설명
The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube. With a built in dowel pin and precise inner diameter to make a 100% seal with the rubber grommet, this piece installs and fits as if it had a Mitsubishi part number. The system is then braced to the chassis with an aluminum bracket to ensure no movement or vibration. A single-piece mandrel bent 3" intake pipe makes the connection between the MAF and turbo with a smooth transition recirculation fitting for an easy connection to the BOV discharge. The ETS Mitsubishi Evolution X Intake includes a 5.0" velocity stack making it the largest intake on the market. This intake has been proven to gain over 56whp when used with a manual boost controller at 22psi. Features:5" KN FilterETS Milled MAF AdapterPerfrect Transition From Adapter To MAFBlow Off Valve Recirculation TubeIncludes heat shield to prevent idle surge.BOV Vacuum LineAll Couplers, Clamps and Hardware.+56whp when used with a boost controller @ 22psiWeight: 3lbs
2019-07-27 23:17:12