RuggedMade 13 GPM 2 Stage Hydraulic Log Splitter Pump, 3000 PSI
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.1/2" shaft w/ keyway4-hole bolt pattern1" barb on inlet port1/2" NPT threads on outlet portAluminum body
상품설명
Size Name:13 GPM The RuggedMade 13 GPM hydraulic pump is an excellent replacement pump for log splitters, hydraulic presses, snow plow power units and a variety of other agricultural power equipment. This two-stage gear pump provides faster cycle times with an over-all higher pressure rating, so you can squeeze every bit of power out of your equipment. RuggedMade 13 GPM Hydraulic Pump Specs GPM: 13 Type: Two Stage Input RPM: 3600 Nominal Flow (GPM): 13 Min. HP Required: 6.5 Inlet Ports (In.): 1 Tube Outlet Ports (In.): 1/2 NPT Shaft OD (In.): 1/2 Shaft Length (In.): 1-1/2 Transmission: 2 Stage Displacement High Pressure (Cubic In./Rev.): 0.22 Displacement Low Pressure (Cubic In./Rev.): 0.665 Drive Shaft (In.): 1/2 Max. PSI 1st Stage: 3000 Max. PSI 2nd Stage: 900 Unloading Valve Preset Pressure (PSI): 600 to 700 Mounting Positions: Horizontal & Vertical Mounting Flange: 4 Bolt Rotation: Clockwise Hydraulic Fluid Type: AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) Note: Not designed for use with "universal" or "tractor" hydraulic fluid Note: Suction-side filtration should be no finer than 150 micron Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
Make sure this fits by entering your model number.1/2" shaft w/ keyway4-hole bolt pattern1" barb on inlet port1/2" NPT threads on outlet portAluminum body
상품설명
Size Name:13 GPM The RuggedMade 13 GPM hydraulic pump is an excellent replacement pump for log splitters, hydraulic presses, snow plow power units and a variety of other agricultural power equipment. This two-stage gear pump provides faster cycle times with an over-all higher pressure rating, so you can squeeze every bit of power out of your equipment. RuggedMade 13 GPM Hydraulic Pump Specs GPM: 13 Type: Two Stage Input RPM: 3600 Nominal Flow (GPM): 13 Min. HP Required: 6.5 Inlet Ports (In.): 1 Tube Outlet Ports (In.): 1/2 NPT Shaft OD (In.): 1/2 Shaft Length (In.): 1-1/2 Transmission: 2 Stage Displacement High Pressure (Cubic In./Rev.): 0.22 Displacement Low Pressure (Cubic In./Rev.): 0.665 Drive Shaft (In.): 1/2 Max. PSI 1st Stage: 3000 Max. PSI 2nd Stage: 900 Unloading Valve Preset Pressure (PSI): 600 to 700 Mounting Positions: Horizontal & Vertical Mounting Flange: 4 Bolt Rotation: Clockwise Hydraulic Fluid Type: AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) Note: Not designed for use with "universal" or "tractor" hydraulic fluid Note: Suction-side filtration should be no finer than 150 micron Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
2019-03-27 19:10:36