Manual Standard Shifter Stainless Short Throw 3/8"-16 Compatible with Dodge Ram G56 2500 3500
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Hand machined and Tig welded solid 304 Stainless Steel 8” short throw for 2006.5-2018 3rd Gen Dodge trucks Ram 6-speed. For 2006 models only: this is a half-year with Dodge changing the design of the mount. Please verify fitment by removing your boot and checking installation is by two 5/16" holes on 1" centers.Solid 30 oz. 304SS weight at bottom allows smooth effortless shifts and eliminates the damper breaking point. NO Rubber Isolator!Shifts are much easier and stronger since the 5/8” diameter solid Stainless does not flex like factory3/8”-16 threaded stud for knob; Includes all replacement bolts and nuts for installationMade in U.S.A
상품설명
This is a replacement aftermarket manual shifter Compatible with 2006.5+ Ram 6-speed. Hand machined and Tig welded solid 304 Stainless Steel 8” short throw. If you’re looking for an improved smoother shift this is the perfect mix of a comfortable shift with a major throw reduction. Short straight throw design reduces the area of the throw by 20% compared to the factory set up.Shifts are much easier and stronger since the 5/8” diameter solid Stainless does not flex like factory. Includes 30 oz. 304 SS solid weight welded to the bottom to allow smooth effortless shifts. NO rubber isolator. This shifter is specifically designed to replace shifters that have broken at the damper point. By welding the entire shifter as a solid piece without an isolator it will never break unlike the factory damper. The factory rubber damper often breaking after only a couple thousand miles! However the removal of the damper may cause some noise in the cab depending on your transmission. Comes wilt a professionally polished stainless steel finish. Fits G56 transmissions (2006.5-2018 3rd Gen Dodge trucks). For 2006 models only, this is a half-year and this shifter may not fit some 2006 year trucks. You must verify that the mounting point is two 5/16" holes on 1 inch centers if you have 2006 year model. Accepts OEM rubber sealing boot, and leather console boot. 3/8”-16 thread will not accept factory knob. (Factory is M10) Use your own 3/8” threaded knob. Includes shifter, two (2) bolts, four (4) washers, and two (2) nuts. Easy installation should take about 15 minutes.
Make sure this fits by entering your model number.Hand machined and Tig welded solid 304 Stainless Steel 8” short throw for 2006.5-2018 3rd Gen Dodge trucks Ram 6-speed. For 2006 models only: this is a half-year with Dodge changing the design of the mount. Please verify fitment by removing your boot and checking installation is by two 5/16" holes on 1" centers.Solid 30 oz. 304SS weight at bottom allows smooth effortless shifts and eliminates the damper breaking point. NO Rubber Isolator!Shifts are much easier and stronger since the 5/8” diameter solid Stainless does not flex like factory3/8”-16 threaded stud for knob; Includes all replacement bolts and nuts for installationMade in U.S.A
상품설명
This is a replacement aftermarket manual shifter Compatible with 2006.5+ Ram 6-speed. Hand machined and Tig welded solid 304 Stainless Steel 8” short throw. If you’re looking for an improved smoother shift this is the perfect mix of a comfortable shift with a major throw reduction. Short straight throw design reduces the area of the throw by 20% compared to the factory set up.Shifts are much easier and stronger since the 5/8” diameter solid Stainless does not flex like factory. Includes 30 oz. 304 SS solid weight welded to the bottom to allow smooth effortless shifts. NO rubber isolator. This shifter is specifically designed to replace shifters that have broken at the damper point. By welding the entire shifter as a solid piece without an isolator it will never break unlike the factory damper. The factory rubber damper often breaking after only a couple thousand miles! However the removal of the damper may cause some noise in the cab depending on your transmission. Comes wilt a professionally polished stainless steel finish. Fits G56 transmissions (2006.5-2018 3rd Gen Dodge trucks). For 2006 models only, this is a half-year and this shifter may not fit some 2006 year trucks. You must verify that the mounting point is two 5/16" holes on 1 inch centers if you have 2006 year model. Accepts OEM rubber sealing boot, and leather console boot. 3/8”-16 thread will not accept factory knob. (Factory is M10) Use your own 3/8” threaded knob. Includes shifter, two (2) bolts, four (4) washers, and two (2) nuts. Easy installation should take about 15 minutes.
2022-04-14 19:14:37