FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈       
사진확대

bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
ASIN번호 B0196WL55G
상품상태 New   
상품구분 Tools & Home Improvement / Rough Plumbing
브랜드 bayite
판매자 CrocSee
판매자위치 미확인
현지 판매 가격
$19.90
상품가격 상세보기
관련상품



상품특징
Make sure this fits by entering your model number.Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn't mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure1/2" Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDEDPower source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using itMax circulating water temperature: 100°C/212°F. It's submersible but can't be immersed in hot water exceeding 50°C/122℉One year warranty: replacement without return
상품설명
It's perfect for the home solar water heating systems or other circulation pump application. Brushless Motor,Super long working life,low consumption and low noise Power source: DC 12V Rated current: 0.7A Low noise: 30db at 1 metre Service life: 30000 hours up Inlet/Outlet: 1/2" male thead. Fit both 1/2" NPT and BSP female thead. We've tested. w/ two brass coupler Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 8L/Min(2.1GPM) Max Water Head: 3 metre(9.8ft) Max system pressure: 10Bar(145PSI). This doesn't mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure. Max circulating water temperature: 100°C/212°F. Can't be immersed in hot water exceeding 50°C/122℉
































상품특징
Make sure this fits by entering your model number.Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn't mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure1/2" Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDEDPower source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using itMax circulating water temperature: 100°C/212°F. It's submersible but can't be immersed in hot water exceeding 50°C/122℉One year warranty: replacement without return
상품설명
It's perfect for the home solar water heating systems or other circulation pump application. Brushless Motor,Super long working life,low consumption and low noise Power source: DC 12V Rated current: 0.7A Low noise: 30db at 1 metre Service life: 30000 hours up Inlet/Outlet: 1/2" male thead. Fit both 1/2" NPT and BSP female thead. We've tested. w/ two brass coupler Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 8L/Min(2.1GPM) Max Water Head: 3 metre(9.8ft) Max system pressure: 10Bar(145PSI). This doesn't mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure. Max circulating water temperature: 100°C/212°F. Can't be immersed in hot water exceeding 50°C/122℉




























2019-04-10 21:27:55