Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub, Black
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.Thermal Protection Circuit, Short Protection Circuit.Overload Protection Circuit. Phase Switch: 0° or 180°.Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.Note: Kindly refer User Manual before use
상품설명
Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the (+) terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.
Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.Thermal Protection Circuit, Short Protection Circuit.Overload Protection Circuit. Phase Switch: 0° or 180°.Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.Note: Kindly refer User Manual before use
상품설명
Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the (+) terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.
2019-04-01 22:03:49