T-Rex Racing 2015-2019 Suzuki GSX-S750 No Cut Frame Front & Rear Axle Sliders, Case Cover, Spool Adapters -Black
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Special feature: The pucks are solid and not hollow, made to withstand more of an impactMaterial: UHMW-PE (ultra high molecular weight polyethylene). The brackets are made of Steel.NO CUT or plastic fairings modification requiredFit Models: SUZUKI 2015 - 2019 GSX-S750
상품설명
This purchase is for a set of frame sliders, case covers, and front & rear axle sliders and spool adapters for the above bike models. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets have two attachment points preventing them from rotating in the event of a low side. Normal spools will damage the stock exhaust because the spool mounts located too much forward and too close to the exhausts. These spool adapters are designed to prevent damage to the exhausts and the swingarms. It moves the spools rearward about two inches. The material of the sliders, spools, and case covers are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.
Special feature: The pucks are solid and not hollow, made to withstand more of an impactMaterial: UHMW-PE (ultra high molecular weight polyethylene). The brackets are made of Steel.NO CUT or plastic fairings modification requiredFit Models: SUZUKI 2015 - 2019 GSX-S750
상품설명
This purchase is for a set of frame sliders, case covers, and front & rear axle sliders and spool adapters for the above bike models. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets have two attachment points preventing them from rotating in the event of a low side. Normal spools will damage the stock exhaust because the spool mounts located too much forward and too close to the exhausts. These spool adapters are designed to prevent damage to the exhausts and the swingarms. It moves the spools rearward about two inches. The material of the sliders, spools, and case covers are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.
2020-04-03 11:17:07