SHINA 6pcs Hardness Tungsten Steel Alloy Coated Cutter Drill Bit Tools 6mm-16mm Cemented Carbide Spherical Buddha Beads Woodworking
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Made of high-quality cemented carbide.Used for cutting Hardwood, softwood, composite boardAgarwood, rosewood, sandalwood, golden nanmu and other high-grade woods ,woodworking Buddha beads .Cutter Edging Dia.: 6mm/8mm/10mm/12mm/15mm/16mmDrill Pin Dia.: 1.5mm /2mm Shank diameter (SHK): 10mm /12.7mmPlease note: Please use flat wood processing. It is recommended to use it on bench drills. Try to avoid using it on hand-held electric drills.
상품설명
Description: The drill pin can be adjustable and removeable Cutter Edging Dia.: 6mm/8mm/10mm/12mm/15mm/16mm Drill Pin Dia.: 1.5mm /2mm Shank diameter (SHK): 10mm /12.7mm Package include : 6 x Drill Bits Please Note: 1: To process a complete and smooth woodworking beads, be sure to use short-edged tools as much as possible. Excessively long cutting edges or too long tool bodies will cause vibration and deviation during processing, which will result in tool damage and affect processing quality. 2: Woodworking milling cutters are specially designed for portable and desktop woodworking engraving machines, and cannot be used on electric drills, drilling machines and other equipment. 3: The tool can produce a smooth surface on hardwood, softwood, synthetic board and other wood, but avoid processing metal materials such as copper and non-wood materials such as sand and stone. 4: Be sure to use a suitable size jacket, because the jacket with serious wear, insufficient roundness and taper in the hole can not provide enough tightening force, which will cause vibration or twisting of the tool handle and flying off. 5: The contact between the tool shank and the jacket should be good. The tool shank must be completely inserted into the jacket and tightened firmly, so as to provide sufficient tightening force for the tool. Do not insert only a small part into the jacket, otherwise it is easy to break the tool holder and cause damage to the tool.
Made of high-quality cemented carbide.Used for cutting Hardwood, softwood, composite boardAgarwood, rosewood, sandalwood, golden nanmu and other high-grade woods ,woodworking Buddha beads .Cutter Edging Dia.: 6mm/8mm/10mm/12mm/15mm/16mmDrill Pin Dia.: 1.5mm /2mm Shank diameter (SHK): 10mm /12.7mmPlease note: Please use flat wood processing. It is recommended to use it on bench drills. Try to avoid using it on hand-held electric drills.
상품설명
Description: The drill pin can be adjustable and removeable Cutter Edging Dia.: 6mm/8mm/10mm/12mm/15mm/16mm Drill Pin Dia.: 1.5mm /2mm Shank diameter (SHK): 10mm /12.7mm Package include : 6 x Drill Bits Please Note: 1: To process a complete and smooth woodworking beads, be sure to use short-edged tools as much as possible. Excessively long cutting edges or too long tool bodies will cause vibration and deviation during processing, which will result in tool damage and affect processing quality. 2: Woodworking milling cutters are specially designed for portable and desktop woodworking engraving machines, and cannot be used on electric drills, drilling machines and other equipment. 3: The tool can produce a smooth surface on hardwood, softwood, synthetic board and other wood, but avoid processing metal materials such as copper and non-wood materials such as sand and stone. 4: Be sure to use a suitable size jacket, because the jacket with serious wear, insufficient roundness and taper in the hole can not provide enough tightening force, which will cause vibration or twisting of the tool handle and flying off. 5: The contact between the tool shank and the jacket should be good. The tool shank must be completely inserted into the jacket and tightened firmly, so as to provide sufficient tightening force for the tool. Do not insert only a small part into the jacket, otherwise it is easy to break the tool holder and cause damage to the tool.
2019-03-21 09:42:45