HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.Tested compatible for Arduino Mega, Diecimila & Duemilanove.2 interface for 5V Servo connected to the Arduino\'s high-resolution dedicated timer - no jitter.Multi-function, easy to operate, a strong driver library support and feature updates.
상품설명
Features: 1. to 4 bidirectional DC motors and 4 PWM speed controllers (approximately 0.5% resolution) 2. Up to 2 stepper motor forward and reverse control, single / double step control, staggered or micro-step and rotation angle control 3. 4-way H-bridge: The L293D chip provides 0.6A (peak 1.2A) current per bridge with thermal shutdown protection, 4.5Vto36V 4. The pull-down resistor ensures that the motor remains stopped at power-up 5. Large terminal blocks make wiring easier (10-22AWG) and power 6. With reset button 7. 2 large terminal external power terminals, to ensure logic and motor drive power separation 8. Download Easy to use software library for rapid project development Package Included: 1*L293D Motor Driver Shield
This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.Tested compatible for Arduino Mega, Diecimila & Duemilanove.2 interface for 5V Servo connected to the Arduino\'s high-resolution dedicated timer - no jitter.Multi-function, easy to operate, a strong driver library support and feature updates.
상품설명
Features: 1. to 4 bidirectional DC motors and 4 PWM speed controllers (approximately 0.5% resolution) 2. Up to 2 stepper motor forward and reverse control, single / double step control, staggered or micro-step and rotation angle control 3. 4-way H-bridge: The L293D chip provides 0.6A (peak 1.2A) current per bridge with thermal shutdown protection, 4.5Vto36V 4. The pull-down resistor ensures that the motor remains stopped at power-up 5. Large terminal blocks make wiring easier (10-22AWG) and power 6. With reset button 7. 2 large terminal external power terminals, to ensure logic and motor drive power separation 8. Download Easy to use software library for rapid project development Package Included: 1*L293D Motor Driver Shield
2019-03-27 14:45:03
