HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
4 M2 screw holes for easy installation.4-digit LED display module with LED brightness adjustable and clock point.Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable.The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.
상품설명
Description: The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver TM1637; only two signal lines can make the MCU control 4 bits 8 digital tube. Parameter: Supply voltage: 3.3V--5v DC Module current: 30--80MA (when 5V supply power) Module size: Approx. 42 x 24 x 11mm / 1.65 x 0.94 x 0.43 inch (not include pin), 48 x 24 x 11mm /1.88 x 0.94 x 0.43 inch Control port: 4 common anode score points with 0.36 inches LED, red highlights Location hole: 4pcs M3 screw location hole, hole diameter: 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination Package Included: 2* 4-Bit LED Digital Tube Module
4 M2 screw holes for easy installation.4-digit LED display module with LED brightness adjustable and clock point.Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable.The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.
상품설명
Description: The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver TM1637; only two signal lines can make the MCU control 4 bits 8 digital tube. Parameter: Supply voltage: 3.3V--5v DC Module current: 30--80MA (when 5V supply power) Module size: Approx. 42 x 24 x 11mm / 1.65 x 0.94 x 0.43 inch (not include pin), 48 x 24 x 11mm /1.88 x 0.94 x 0.43 inch Control port: 4 common anode score points with 0.36 inches LED, red highlights Location hole: 4pcs M3 screw location hole, hole diameter: 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination Package Included: 2* 4-Bit LED Digital Tube Module
2019-04-10 07:12:58