FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈           
사진확대

DMM Dragon Cam
ASIN번호 B01EGP6S9G
상품상태 New   
상품구분 Sports & Outdoors / Outdoor Recreation
브랜드 DMM
판매자 미정
판매자위치 미확인
Size
Color
현지 판매 가격
$74.95
상품가격 상세보기
관련상품



상품특징
A lightweight single stem cam with dual axlesSpecial thumb grip and trigger bar for easy handlingWeight: 85 gGate Opening: N/AStrength: 12 kN
상품설명
A couple of years ago we decided to expand our cam range by producing a single stem design with a dual axle. A simple enough proposal you might think, but not if you want to make a cam that would stand head and shoulders above the rest. The main advantage of the single stem design with two axles is that it allows a greater range for each camming unit. We have kept Ray Jardine's original 13.75Degree constant camming angle, which gives the perfect balance between holding power and range. The benefits of this increased range are obvious, but we knew we could push things to another level by focusing on other aspects of the design. By introducing the hot forging process for the cam lobes (in sizes 1 to 6) we were able to produce a highly sophisticated shape in A6082 alloy for the added bite and make significant weight savings. We have used strong springs to make the cam sit more securely, it also means they are more resistant to being pulled out of slippy placements and the potential for 'walking' is reduced.












상품특징
A lightweight single stem cam with dual axlesSpecial thumb grip and trigger bar for easy handlingWeight: 85 gGate Opening: N/AStrength: 12 kN
상품설명
A couple of years ago we decided to expand our cam range by producing a single stem design with a dual axle. A simple enough proposal you might think, but not if you want to make a cam that would stand head and shoulders above the rest. The main advantage of the single stem design with two axles is that it allows a greater range for each camming unit. We have kept Ray Jardine's original 13.75Degree constant camming angle, which gives the perfect balance between holding power and range. The benefits of this increased range are obvious, but we knew we could push things to another level by focusing on other aspects of the design. By introducing the hot forging process for the cam lobes (in sizes 1 to 6) we were able to produce a highly sophisticated shape in A6082 alloy for the added bite and make significant weight savings. We have used strong springs to make the cam sit more securely, it also means they are more resistant to being pulled out of slippy placements and the potential for 'walking' is reduced.








2019-03-30 13:18:07