FIRSTINFO Plus Version 15 Liter Pneumatic Oil Extractor/Vacuum Pump Manual Fluid Extractor Includes 6.6 ft Long Silicon Brake Fluid Hose + Extra 3.5x4.5 mm Hose w/Hose Storage & Dust Cover
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.?*Larger 15L Capacity*- 15 Liter of capacity (holds up to 3.9 gal of fluid ) which is perfect for cars with large engines without stopping the oil changing during the extraction. FIRSTINFO’s oil extractors are made of polypropylene which can stand up 35°F~200°F’s fluids.?*No Limits, Work Freely & Widely* -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. No limits to any places and no need to lift up or crawl under the car to change oil. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity or acidity high temperature are FORBIDDEN to be used with this extractor.?*Multi-Function w/ Upgraded Brake Bleeding Hose*+ Plus Version Design w/ Hose Storage -- One extra upgraded brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) Long with check valve to avoid oil back flowing when bleeding. With the storage hose to collect oil hoses easily, and duster cover to avoid any dust and dirt.? *Two-Way Mode for Oil Change*-- Fast extraction speed of 1.6L /min. The pneumatic way for higher speed of oil change; just need to connect with air compressor. Manual operation requires no other equipment; easy to do the oil / fluid changing for DIY anywhere. No need to to lift up or crawl under the car to change oil.?*Different sizes of Nylon tubes/ Extra 3.5x4.5mm Thinnest One*-- With 4 diameters of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M. B hose can be connected to (C,D or E ) hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
Make sure this fits by entering your model number.?*Larger 15L Capacity*- 15 Liter of capacity (holds up to 3.9 gal of fluid ) which is perfect for cars with large engines without stopping the oil changing during the extraction. FIRSTINFO’s oil extractors are made of polypropylene which can stand up 35°F~200°F’s fluids.?*No Limits, Work Freely & Widely* -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. No limits to any places and no need to lift up or crawl under the car to change oil. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity or acidity high temperature are FORBIDDEN to be used with this extractor.?*Multi-Function w/ Upgraded Brake Bleeding Hose*+ Plus Version Design w/ Hose Storage -- One extra upgraded brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) Long with check valve to avoid oil back flowing when bleeding. With the storage hose to collect oil hoses easily, and duster cover to avoid any dust and dirt.? *Two-Way Mode for Oil Change*-- Fast extraction speed of 1.6L /min. The pneumatic way for higher speed of oil change; just need to connect with air compressor. Manual operation requires no other equipment; easy to do the oil / fluid changing for DIY anywhere. No need to to lift up or crawl under the car to change oil.?*Different sizes of Nylon tubes/ Extra 3.5x4.5mm Thinnest One*-- With 4 diameters of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M. B hose can be connected to (C,D or E ) hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
2020-11-13 21:56:01