Singing Tree Rope Wrench Kit with At-Height Stiff Tether and ISC Pulley (Purple)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Kit includes the Rope Wrench, At Height stiff tether, and ISC RP281 micro pulleyCompatible with rope 7/16" - 1/2" in diameterThe body and wheel of both the pulley and wrench are made of aluminum with an anodized finishThe quick release pin on the wrench and swivelling side plates on the pulley allow for quick attachment and removalA Hitch cord and carabiner are required to complete setup
상품설명
The Singing Tree Rope Wrench ZK-2 (STRW) is one of the most popular tools used by arborists when they work using single rope technique. The STRW adds friction by creating a ‘bend’ in the rope, above the climber’s friction hitch. With the addition of a stiff tether, the STRW created a 'contained double rope system', on a single line of rope. This contained double rope system travels with the climber as they move around the tree, allowing a consistent level of friction on the hitch, which is often impossible to achieve in double rope climbing. The stiff tether is professionally spliced by the experts from At Height. It features a stiff rubber bumper to prevent the STRW from going into 'neutral' and is made of 8mm Beeline cordage wrapped in several layers of adhesive shrink tube. The tether has an overall length of twelve inches. The RP281 pulley from ISC was designed specifically for the Rope Wrench system. It has swivelling side plates and , a bushing wheel, and weighs only 2.7 ounces.
Make sure this fits by entering your model number.Kit includes the Rope Wrench, At Height stiff tether, and ISC RP281 micro pulleyCompatible with rope 7/16" - 1/2" in diameterThe body and wheel of both the pulley and wrench are made of aluminum with an anodized finishThe quick release pin on the wrench and swivelling side plates on the pulley allow for quick attachment and removalA Hitch cord and carabiner are required to complete setup
상품설명
The Singing Tree Rope Wrench ZK-2 (STRW) is one of the most popular tools used by arborists when they work using single rope technique. The STRW adds friction by creating a ‘bend’ in the rope, above the climber’s friction hitch. With the addition of a stiff tether, the STRW created a 'contained double rope system', on a single line of rope. This contained double rope system travels with the climber as they move around the tree, allowing a consistent level of friction on the hitch, which is often impossible to achieve in double rope climbing. The stiff tether is professionally spliced by the experts from At Height. It features a stiff rubber bumper to prevent the STRW from going into 'neutral' and is made of 8mm Beeline cordage wrapped in several layers of adhesive shrink tube. The tether has an overall length of twelve inches. The RP281 pulley from ISC was designed specifically for the Rope Wrench system. It has swivelling side plates and , a bushing wheel, and weighs only 2.7 ounces.
2019-10-15 12:40:06