SunFounder IIC I2C Line Follower Module 8 Channel Infrared IR Detection Tracking Sensor for Arduino Smart Car Robot Robotics MCU STM8S105C4 TCRT5000
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Uses the MCU STM8S105C4 as the controller, and the TCRT5000 infrared photoelectric sensor on each of the 8 line-following modulesAdopts I2C ports which only occupies 4 pins of the MCUThe sensor TCRT5000 is highly sensitive with reliable performance(SensingDistance:12mm , 8mmwill be the bestWith a RESET button on the board for resetting, and positioning holes on the board for easy assemblySupply Voltage: 5V; PCB Dimensions: 124mm x 30mm
상품설명
Introduction The TCRT5000 infrared photoelectric switch adopts a high transmit power infrared photodiode and a highly sensitive phototransistor. It works by applying the principle of objects' reflecting IR light –the light is emitted, then reflected, and sensed by thesynchronous circuit. Then it determines whether there exists an object or not by the light intensity. It can easily identify black and white lines. In other words, the different conduction levels of the phototransistor when it passes over black and white lines can generate different output voltages. Therefore, all we need to do is to collect data by the AD converter on the STM8S105C4 and then send the data to the master control board via I2C communication. This module is an infrared tracking sensor onethat uses a TRT5000 sensor. The blue LED of TRT5000 is the emission tube and after electrified it emits infrared light invisible to human eye. The black part of the sensor is for receiving; the resistance of the resistor inside changes with the infrared light received. Note: When the module is working, it's normal to get heated. And this module is not compatible with Raspberry Pi. More details can be found in http://wiki.sunfounder.cc/index.php?title=Line_Follower_Module Package Included 1 x Tracking Sensor Module 1 x 4-Pin anti-reverse Cable
Make sure this fits by entering your model number.Uses the MCU STM8S105C4 as the controller, and the TCRT5000 infrared photoelectric sensor on each of the 8 line-following modulesAdopts I2C ports which only occupies 4 pins of the MCUThe sensor TCRT5000 is highly sensitive with reliable performance(SensingDistance:12mm , 8mmwill be the bestWith a RESET button on the board for resetting, and positioning holes on the board for easy assemblySupply Voltage: 5V; PCB Dimensions: 124mm x 30mm
상품설명
Introduction The TCRT5000 infrared photoelectric switch adopts a high transmit power infrared photodiode and a highly sensitive phototransistor. It works by applying the principle of objects' reflecting IR light –the light is emitted, then reflected, and sensed by thesynchronous circuit. Then it determines whether there exists an object or not by the light intensity. It can easily identify black and white lines. In other words, the different conduction levels of the phototransistor when it passes over black and white lines can generate different output voltages. Therefore, all we need to do is to collect data by the AD converter on the STM8S105C4 and then send the data to the master control board via I2C communication. This module is an infrared tracking sensor onethat uses a TRT5000 sensor. The blue LED of TRT5000 is the emission tube and after electrified it emits infrared light invisible to human eye. The black part of the sensor is for receiving; the resistance of the resistor inside changes with the infrared light received. Note: When the module is working, it's normal to get heated. And this module is not compatible with Raspberry Pi. More details can be found in http://wiki.sunfounder.cc/index.php?title=Line_Follower_Module Package Included 1 x Tracking Sensor Module 1 x 4-Pin anti-reverse Cable
2019-06-25 18:37:47