Cascade Microphones 98-G-A FAT HEAD Ribbon Microphone, Brown Body/Gold Grill
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Brown Body/ Gold GrillIncludes FAT HEAD Ribbon MicrophoneMolded Flight CaseMic ClipLeatherette Pouch
상품설명
Unlike most ribbon motors designed today with an offset ribbon the new Cascade FAT HEAD houses a hand-tuned ribbon element that incorporates the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. This design is very useful when executing a mid-side or Blumlein recording set-up and also great for live stage use. The FAT HEAD warm full-bodied signature and increased sensitivity is what you would expect and demand from a professional ribbon microphone and the FAT HEAD delivers. The FAT HEAD is suited for guitar cabinets, drum over-heads, vocal, piano, horns, strings, and much more. Specifications: Type: Ribbon (velocity) Microphone Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W) Polar pattern: Figure 8 Symmetrical design Sensitivity: -56 db. +/- 2 dB (0 dB=1V/Pa) Frequency response: See PDF below Output Impedance: <=200 Ohms Recommended load impedance: >1000 Ohms Max. SPL (1% THD @1000 Hz): 135 dB Connector: 3-Pin male XLR Size: Diameter: 3" (O.D. grill), overall length 6 1/2", 1" (O.D. body)
Brown Body/ Gold GrillIncludes FAT HEAD Ribbon MicrophoneMolded Flight CaseMic ClipLeatherette Pouch
상품설명
Unlike most ribbon motors designed today with an offset ribbon the new Cascade FAT HEAD houses a hand-tuned ribbon element that incorporates the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. This design is very useful when executing a mid-side or Blumlein recording set-up and also great for live stage use. The FAT HEAD warm full-bodied signature and increased sensitivity is what you would expect and demand from a professional ribbon microphone and the FAT HEAD delivers. The FAT HEAD is suited for guitar cabinets, drum over-heads, vocal, piano, horns, strings, and much more. Specifications: Type: Ribbon (velocity) Microphone Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W) Polar pattern: Figure 8 Symmetrical design Sensitivity: -56 db. +/- 2 dB (0 dB=1V/Pa) Frequency response: See PDF below Output Impedance: <=200 Ohms Recommended load impedance: >1000 Ohms Max. SPL (1% THD @1000 Hz): 135 dB Connector: 3-Pin male XLR Size: Diameter: 3" (O.D. grill), overall length 6 1/2", 1" (O.D. body)
2019-04-03 10:37:25
