Shure UA844+SWB Five-way Active Antenna Splitter & Power Distribution System for QLX-D, ULX, ULX-D, SLX & BLX4R Receivers
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Five-way active antenna splitter and power distribution system for QLX-D, ULX, ULX-D, SLX, and BLX (BLX4R only) receiversFront-mounting antenna hardwareRack-mounting hardware4 DC power feeds and for receivers (15V, 2.5A max)DC outputs for antenna bias (12V, 300mA max)
상품설명
The Shure Model UA844+SWB is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844+SWB system can support up to five wireless receivers. A maximum of five UA844+SWB systems may be used in a two-tiered configuration. Model Number: UA844+SWB (replaces discontinued model UA844US). The UA844+SWB/LC option comes with the four push on DC cables and no antenna cables. It is recommended for use with the BLXR, SLX, and QLX-D wireless systems. To connect the receiver antenna ports to the UA844+SWB/LC, use the BNC-BNC antenna cables supplied with each BLXR, SLX, QLX-D wireless systems.
Five-way active antenna splitter and power distribution system for QLX-D, ULX, ULX-D, SLX, and BLX (BLX4R only) receiversFront-mounting antenna hardwareRack-mounting hardware4 DC power feeds and for receivers (15V, 2.5A max)DC outputs for antenna bias (12V, 300mA max)
상품설명
The Shure Model UA844+SWB is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844+SWB system can support up to five wireless receivers. A maximum of five UA844+SWB systems may be used in a two-tiered configuration. Model Number: UA844+SWB (replaces discontinued model UA844US). The UA844+SWB/LC option comes with the four push on DC cables and no antenna cables. It is recommended for use with the BLXR, SLX, and QLX-D wireless systems. To connect the receiver antenna ports to the UA844+SWB/LC, use the BNC-BNC antenna cables supplied with each BLXR, SLX, QLX-D wireless systems.
2019-05-07 20:07:21