4pc 1" (25mm) Wheel Spacers 5x5 fits Jeep Grand Cherokee Commander Wrangler XK JK WK 5x127
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Vehicle Bolt Pattern: 5x5 (5x127)Wheel Bolt Pattern: 5x5Hub Bore: 87.1mmThread Pitch: 1/2"x 20Thickness: Each Spacer Measure 1" Thick
상품설명
THESE SPACERS WILL FITS THE FOLLOWING VEHICLES 2006-2010 Jeep Commander 2007-2015 Jeep Wrangler 1999-2010 Jeep Grand Cherokee ADDITIONAL INFORMATION Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
Make sure this fits by entering your model number.Vehicle Bolt Pattern: 5x5 (5x127)Wheel Bolt Pattern: 5x5Hub Bore: 87.1mmThread Pitch: 1/2"x 20Thickness: Each Spacer Measure 1" Thick
상품설명
THESE SPACERS WILL FITS THE FOLLOWING VEHICLES 2006-2010 Jeep Commander 2007-2015 Jeep Wrangler 1999-2010 Jeep Grand Cherokee ADDITIONAL INFORMATION Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
2020-04-29 16:43:22