FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
사진확대

Soldering Iron 7/8in1 Kit B/Soldering Wire 02 (Soldering Wire 0.8mm)
ASIN번호 B01M6CFXOQ
상품상태 New   
상품구분 Tools & Home Improvement / Welding & Soldering
브랜드 YOUSHARES
판매자 미정
판매자위치 미확인
Color
현지 판매 가격
$9.79
상품가격 상세보기
관련상품



상품특징
Make sure this fits by entering your model number.High Level Electronical Solder Recommended: Great and brilliant welding joint while slag and smoke 90% lesser, fits various kinds of soldering iron.Melting Point: 217 ℃ (422.6 ℉).Expansion and Elongation Rate: 78% and 58%.Lead Free and Rosin Core: Sn 99%, Ag 0.3%, Cu 0.7% with Flux 2.0%.Solder Net Weight: 100 grams (0.22 lbs / 3.53 ounces); Wick Diameter: 0.8 mm (0.0315 inch).
상품설명
Color:Wire 0.8mm 100g YOUSHARES Lead Free Rosin Core Solder Wire - Fits All Kinds of Your DIY Project · Specification: - Material Compositions: Sn 99%, Ag 0.3%, Cu 0.7% - Rosin Core: Flux 2.0% - Melting Point: 217 ℃ (422.6 ℉) - Elongation Rate: 58% - Expansion Rate: 78% - Solder Net Weight: 100 grams (0.22 lbs / 3.53 ounces) - Solder Wire Diameter: 0.8 mm (0.0315 inch) - Solder Wire Length: about 28.5 meters (93.5 feet) · Package: 1x YOUSHARES Solder Wire Spool · Soldering Tips: 1. Heat up the soldering iron. 2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder. 3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start. 4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second. 5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need. 6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint. 7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.
























상품특징
Make sure this fits by entering your model number.High Level Electronical Solder Recommended: Great and brilliant welding joint while slag and smoke 90% lesser, fits various kinds of soldering iron.Melting Point: 217 ℃ (422.6 ℉).Expansion and Elongation Rate: 78% and 58%.Lead Free and Rosin Core: Sn 99%, Ag 0.3%, Cu 0.7% with Flux 2.0%.Solder Net Weight: 100 grams (0.22 lbs / 3.53 ounces); Wick Diameter: 0.8 mm (0.0315 inch).
상품설명
Color:Wire 0.8mm 100g YOUSHARES Lead Free Rosin Core Solder Wire - Fits All Kinds of Your DIY Project · Specification: - Material Compositions: Sn 99%, Ag 0.3%, Cu 0.7% - Rosin Core: Flux 2.0% - Melting Point: 217 ℃ (422.6 ℉) - Elongation Rate: 58% - Expansion Rate: 78% - Solder Net Weight: 100 grams (0.22 lbs / 3.53 ounces) - Solder Wire Diameter: 0.8 mm (0.0315 inch) - Solder Wire Length: about 28.5 meters (93.5 feet) · Package: 1x YOUSHARES Solder Wire Spool · Soldering Tips: 1. Heat up the soldering iron. 2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder. 3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start. 4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second. 5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need. 6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint. 7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.




















2019-04-08 20:38:31