FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈           
사진확대

ALZO Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment
ASIN번호 B01MF99SGM
상품상태 New   
상품구분 Electronics / Accessories & Supplies
브랜드 ALZO digital
판매자 ALZO Digital
판매자위치 미확인
현지 판매 가격
$44.90
상품가격 상세보기
관련상품



상품특징
Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectorsEasy to install on a drop ceiling with 1 inch wide T-Bar frame, with scissor clamp and two (2) 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stableIncludes American-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardwareThe suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inchesProjector is not included, it is shown for demonstration purposes only; includes an installation guide (see link below under "Technical Specification")
상품설명
This easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling. Projector drop from the ceiling is either 10 or 18 inches. It fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. The simple assembly includes all metal parts and a comprehensive kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. The suspension rod is either 8 or 16 inches long and the mounting bracket is Includes an American written installation manual. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.
































상품특징
Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectorsEasy to install on a drop ceiling with 1 inch wide T-Bar frame, with scissor clamp and two (2) 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stableIncludes American-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardwareThe suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inchesProjector is not included, it is shown for demonstration purposes only; includes an installation guide (see link below under "Technical Specification")
상품설명
This easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling. Projector drop from the ceiling is either 10 or 18 inches. It fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. The simple assembly includes all metal parts and a comprehensive kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. The suspension rod is either 8 or 16 inches long and the mounting bracket is Includes an American written installation manual. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.




























2019-04-23 01:50:03