VEVOR Hydraulic Pressure Gauge Kit Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Test Kit for Excavator Construction Machinery (Hydraulic Pressure Test Kit) (25/40/60Mpa/9Couplings)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.【work pressure】-- Hydraulic tester max work pressure: 9,000 PSI/600 Bar/60 MPa, 3 test hoses, 60 inch long【parameter】-- Hydraulic test point coupling: M10*1, M14×1.5, G1/4,UNF7/16-20, NPT1/4-18【pressure gauge】-- Hydraulic pressure test kit has 3 pressure gauge Ø63mm, 3625 PSI (250 Bar/25 MPa), 5800 PSI (400 Bar/40 MPa), 8700 PSI (600 Bar/60 MPa)【Used】-- Pressure gauges are used in testing the hydraulic pressure of construction machinery at all levels, equipped with engineering machinery commonly used pressure connector【Suitable for】Hydraulic test kit is also used in steel, automotive hydraulic lines, ship pressure on the hydraulic system testing, widely used in automobiles, construction machinery, ships and military fields
상품설명
Size:25/40/60Mpa/9 Couplings 3type The Use and Maintenance of Pressure Measuring Device 1) In using, pressure connector should be installed in the test site of pressure measurement system. The connecting thread of pressure measuring joint should be matched to the threads of the pressure measuring hose. 2) The pressure device can be also measured when the hydraulic system is running, but user should confirm that the pressure point of the pressure gauge is within the range. 3) The pressure device should be placed flat, the distance between pressure measuring point and the pressure device does not exceed 85% of hose length. 4) In measuring pressure, the pressure measurement hose should be connected to the corresponding pressure gauge joint, and then unscrew the dust cover of pressure measuring tie-in, connect the other end of the pressure measuring hose to the pressure connector, user can carry out pressure detection. 5 After measuring pressure, you should first unscrew the pressure measuring hose that is connected to the pressure connector, screwed on the dust cover, then unscrew the pressure measurement hose that is connected to the corresponding pressure gauge joint. 6) After testing, the oil on the pressure device should be wiped, cover the lid and lock it. 7) The device should be kept careful in using and storage, and pressure gauge should be inspected after six months.
Make sure this fits by entering your model number.【work pressure】-- Hydraulic tester max work pressure: 9,000 PSI/600 Bar/60 MPa, 3 test hoses, 60 inch long【parameter】-- Hydraulic test point coupling: M10*1, M14×1.5, G1/4,UNF7/16-20, NPT1/4-18【pressure gauge】-- Hydraulic pressure test kit has 3 pressure gauge Ø63mm, 3625 PSI (250 Bar/25 MPa), 5800 PSI (400 Bar/40 MPa), 8700 PSI (600 Bar/60 MPa)【Used】-- Pressure gauges are used in testing the hydraulic pressure of construction machinery at all levels, equipped with engineering machinery commonly used pressure connector【Suitable for】Hydraulic test kit is also used in steel, automotive hydraulic lines, ship pressure on the hydraulic system testing, widely used in automobiles, construction machinery, ships and military fields
상품설명
Size:25/40/60Mpa/9 Couplings 3type The Use and Maintenance of Pressure Measuring Device 1) In using, pressure connector should be installed in the test site of pressure measurement system. The connecting thread of pressure measuring joint should be matched to the threads of the pressure measuring hose. 2) The pressure device can be also measured when the hydraulic system is running, but user should confirm that the pressure point of the pressure gauge is within the range. 3) The pressure device should be placed flat, the distance between pressure measuring point and the pressure device does not exceed 85% of hose length. 4) In measuring pressure, the pressure measurement hose should be connected to the corresponding pressure gauge joint, and then unscrew the dust cover of pressure measuring tie-in, connect the other end of the pressure measuring hose to the pressure connector, user can carry out pressure detection. 5 After measuring pressure, you should first unscrew the pressure measuring hose that is connected to the pressure connector, screwed on the dust cover, then unscrew the pressure measurement hose that is connected to the corresponding pressure gauge joint. 6) After testing, the oil on the pressure device should be wiped, cover the lid and lock it. 7) The device should be kept careful in using and storage, and pressure gauge should be inspected after six months.
2019-04-26 22:41:12
