Rizoma Conical 29mm Handlebar, Low Bend, Black (MA006B)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.These Rizoma thick walled aluminum bars are 29mm (1-1/8") at the mounting point and 22mm (7/8") in diameter at the controls.If replacing standard 7/8" Bars, you can use rizoma\'s AZ402B or AZ403B Risers, listed seperatelyPlease see the measurements of these in the attached picture
상품설명
These Rizoma thick walled aluminum bars are 29mm (1-1/8") at the mounting point and 22mm (7/8") in diameter at the controls. This design not only make the bars stronger, it helps minimize vibration transmitted through the bars. The Dimensions for each bend are listed in the picture. If you don\'t see the bend you\'re looking for listed, feel free to contact us. There are 4 available bends: Low Bend(MA006): Low Bend with the control section angled back slightly more towards the rider. High Bend (MA009): 20mm Higher than the low bar, with a less swept back control section. A Cross-brace is available for this bar, Listed separately. Sport Bend (MA011) Lowest rise, with less pullback for a more weight forward position. Drag Bar (MA015) Very low/Flat and forward, almost no pullback.
Make sure this fits by entering your model number.These Rizoma thick walled aluminum bars are 29mm (1-1/8") at the mounting point and 22mm (7/8") in diameter at the controls.If replacing standard 7/8" Bars, you can use rizoma\'s AZ402B or AZ403B Risers, listed seperatelyPlease see the measurements of these in the attached picture
상품설명
These Rizoma thick walled aluminum bars are 29mm (1-1/8") at the mounting point and 22mm (7/8") in diameter at the controls. This design not only make the bars stronger, it helps minimize vibration transmitted through the bars. The Dimensions for each bend are listed in the picture. If you don\'t see the bend you\'re looking for listed, feel free to contact us. There are 4 available bends: Low Bend(MA006): Low Bend with the control section angled back slightly more towards the rider. High Bend (MA009): 20mm Higher than the low bar, with a less swept back control section. A Cross-brace is available for this bar, Listed separately. Sport Bend (MA011) Lowest rise, with less pullback for a more weight forward position. Drag Bar (MA015) Very low/Flat and forward, almost no pullback.
2022-02-22 18:20:14